Publications: Dr Jens-Dominik Mueller
Odier N, Thacker A, Harnieh M, Staffelbach G, Gicquel L, Duchaine F, García Rosa N, Müller JD(2021).
A mesh adaptation strategy for complex wall-modeled turbomachinery LES. Computers and Fluids
vol. 214,
Shahdad S, Patel T, Hindocha A, Cagney N, Mueller JD, Seoudi N, Morgan C, Din A(2020).
The efficacy of an extraoral scavenging device on reduction of splatter contamination during dental aerosol generating procedures: an exploratory study. British Dental Journal (BDJ)
Akbarzadeh S, Hückelheim J, Müller JD(2020).
Consistent treatment of incompletely converged iterative linear solvers in reverse-mode algorithmic differentiation. Computational Optimization and Applications
Mohanamuraly P, Hascoët L, Müller JD(2020).
Seeding and adjoining zero-halo partitioned parallel scientific codes. Optimization Methods and Software
vol. 35,
(3)
618-637.
Din AR, Hindocha A, Patel T, Sudarshan S, Cagney N, Koched A, Mueller JD, Seoudi N et al.(2020).
Quantitative analysis of particulate matter release during orthodontic procedures: a pilot study. British Dental Journal
Xu S, Mueller J-D, Pavanakumar M, Wang D(2019).
A Newton–Krylov Solver for Robust Turbomachinery Aerodynamic Analysis. AIAA Journal: devoted to aerospace research and development
Mueller J, ZHANG X, Akbarzadeh S, WANG Y(2019).
Geometric continuity constraints of automatically derived parametrisations in CAD-based shape optimisation. International Journal of Computational Fluid Dynamics
Roi DP, Mueller J-D, Lobotesis K, McCague C, Memarian S, Khan F, Mankad K(2019).
Intracranial aneurysms: looking beyond size in neuroimaging: the role of anatomical factors and haemodynamics. QUANTITATIVE IMAGING IN MEDICINE AND SURGERY
vol. 9,
(4)
537-545.
Schwalbach M, Verstraete T, Müller JD, Gauger N(2019).
A comparative study of two different CAD-based mesh deformation methods for structural shape optimization. Computational Methods in Applied Sciences,
vol. 49,
Zhang X, Jesudasan R, Müller JD(2019).
Adjoint-based aerodynamic optimisation of wing shape using non-uniform rational B-splines. Computational Methods in Applied Sciences,
vol. 49,
Hückelheim JC, Müller JD(2019).
Checkpointing with Time Gaps for Unsteady Adjoint CFD. Computational Methods in Applied Sciences,
vol. 48,
Banovi¿ M, Mykhaskiv O, Auriemma S, Walther A, Legrand H, Müller JD(2018).
Algorithmic differentiation of the Open CASCADE Technology CAD kernel and its coupling with an adjoint CFD solver. Optimization Methods and Software
vol. 33,
(4-6)
813-828.
Hückelheim JC, Hovland PD, Strout MM, Müller JD(2018).
Parallelizable adjoint stencil computations using transposed forward-mode algorithmic differentiation. Optimization Methods and Software
vol. 33,
(4-6)
672-693.
MUELLER J, Wang Y, HE W(2018).
Sensitivity Analysis and Gradient-based Optimisation of Feed Spacer Shape in Reverse Osmosis Membrane Processes Using Discrete Adjoint Approach. Desalination
mykhaskiv O, MUELLER J, Banovic M, Auriemma S, Mohanamuraly P, Walther A, Legrand H(2018).
NURBS-based and Parametric-based Shape Optimisation with differentiated CAD Kernel. Computer-Aided Design and Applications
Auriemma S, Banovi¿ M, Walther A, Mykhaskiv O, Müller JD (2018).
Applications of differentiated CAD kernel in gradient-based aerodynamic shape optimization. 2018 Joint Propulsion Conference.
Odier N, Duchaine F, Gicquel L, Staffelbach G, Thacker A, García Rosa N, Dufour G, Muller JD (2018).
Evaluation of integral turbulence scale through the fan stage of a turbofan using hot wire anemometry and large eddy simulation. Proceedings of the ASME Turbo Expo.
vol. 2C-2018,
Müller JD, Mykhaskiv O, Hückelheim JC (2018).
STAMPs: A finite-volume solver framework for adjoint codes derived with source-transformation AD. 2018 Multidisciplinary Analysis and Optimization Conference.
Xu S, Timme S, Mykhaskiv O, Müller JD(2017).
Wing-body junction optimisation with CAD-based parametrisation including a moving intersection. Aerospace Science and Technology
vol. 68,
543-551.
Mykhaskiv O, Müller J-D, Mohanamuraly P, Banovic M, Walther A, Auriemma S, Legrand H (2017).
NURBS-based and Parametric-based Shape Optimisation with Differentiated CAD Kernel. 415-419.
Daviller G, Brebion M, Xavier P, Staffelbach G, Müller JD, Poinsot T(2017).
A Mesh Adaptation Strategy to Predict Pressure Losses in LES of Swirled Flows. Flow, Turbulence and Combustion
vol. 99,
(1)
93-118.
MUELLER J, hueckelheim J, hovland P, Strout M(2017).
Reverse-mode algorithmic differentiation of an OpenMP-parallel compressible flow solver. International Journal of High Performance Computing Applications
MUELLER J, verstraete T, Mueller L(2017).
ADJOINT BASED DESIGN OPTIMISATION OF AN INTERNAL COOLING CHANNEL U-BEND FOR MINIMIZED PRESSURE LOSSES. International Journal of turbomachinery propulsion and power
Verstraete T, Müller L, Müller JD(2017).
Adjoint-based design optimisation of an internal cooling channel u-bend for minimised pressure losses. International Journal of Turbomachinery, Propulsion and Power
vol. 2,
(2)
Verstraete T, Müller L, Müller JD (2017).
Adjoint based design optimisation of an internal cooling channel u-bend for minimized pressure losses. 12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2017.
Conference: EuroTurbo
Jesudasan R, Zhang X, Mueller JD (2017).
Adjoint optimisation of internal turbine cooling channel using nurbs-based automatic and adaptive parametrisation method. ASME 2017 Gas Turbine India Conference, GTINDIA 2017.
vol. 1,
Verstraete T, Müller L, Müller JD (2017).
CAD-based adjoint optimization of the stresses in a radial turbine. Proceedings of the ASME Turbo Expo.
vol. 2C-2017,
Mykhaskiv O, Mohanamuraly P, Müller JD, Xu S, Timme S (2017).
CAD-based shape optimisation of the NASA CRM wing-body intersection using differentiated CAD-kernel. 35th AIAA Applied Aerodynamics Conference, 2017.
Verstraete T, Müller L, Müller JD (2017).
Multidisciplinary adjoint optimization of trubomachinery components including aerodynamic and stress performance. 35th AIAA Applied Aerodynamics Conference, 2017.
Imam-Lawal OR, Verstraete T, Müller JD (2017).
Solving an inverse coupled conjugate heat transfer problem by an adjoint approach. Proceedings of the 7th International Conference on Coupled Problems in Science and Engineering, COUPLED PROBLEMS 2017.
vol. 2017-January,
788-799.
Hückelheim JC, Hascoët L, Müller JD(2016).
Algorithmic differentiation of code with multiple context-specific activities. ACM Transactions on Intelligent Systems and Technology
vol. 43,
(4)
JESUDASAN R, Gugala M, Mykhaskiv O, Mueller J (2016).
A comparison of node-based and CAD-based automatic parametrisations in shape optimisation.
Conference: 11th ASMO UK/ISSMO/NOED2016: International Conference on Numerical Optimisation Methods for Engineering Design
(Technische Universität München - Germany (TUM/Garching))
from: 18/07/2016
to: 20/07/2016,
JESUDASAN R, Zhang X, Gugala M, Mueller J.
CAD-free vs CAD-based parametrisation method in adjoint-based aerodynamic shape optimization.
Conference: European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS-2016)
(Crete, Greece)
from: 05/06/2016
to: 10/06/2016,
Zhang X, Wang Y, Gugala M, Müller JD (2016).
Geometric continuity constraints for adjacent nurbs patches in shape optimisation. ECCOMAS Congress 2016 - Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering.
vol. 2,
3985-3998.
Mohanamuraly P, Huckelheim JC, Mueller JD (2016).
Hybrid parallelisation of an algorithmically differentiated adjoint solver. ECCOMAS Congress 2016 - Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering.
vol. 1,
1268-1276.
Auriemma S, Banovic M, Mykhaskiv O, Legrand H, Müller JD, Verstraete T, Walther A (2016).
Optimisation of A U-bend using a cad-based adjoint method with differentiated cad kernel. ECCOMAS Congress 2016 - Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering.
vol. 2,
4023-4034.
Gugala M, Meyer M, Müller JD (2016).
Towards an output-based re-meshing for turbomachinery applications. ECCOMAS Congress 2016 - Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering.
vol. 2,
4011-4022.
Ghani A, Poinsot T, Gicquel L, Müller JD(2015).
LES Study of Transverse Acoustic Instabilities in a Swirled Kerosene/Air Combustion Chamber. Flow, Turbulence and Combustion
vol. 96,
(1)
207-226.
Xu S, Radford D, Meyer M, Müller JD(2015).
Stabilisation of discrete steady adjoint solvers. Journal of Computational Physics
vol. 299,
175-195.
Xu S, Radford D, Meyer M, Müller JD (2015).
Cad-based adjoint shape optimisation of a one-stage turbine with geometric constraints. Proceedings of the ASME Turbo Expo.
vol. 2C,
Xu S, Hückelheimy J, Gugalazand M, Müller JD (2015).
Computation of the tangent-linear solution for LCO-converged nonlinear flows. 53rd AIAA Aerospace Sciences Meeting.
Akbarzadeh S, Wang Y, Müller JD (2015).
Fixed point discrete adjoint of SIMPLE-like solvers. 22nd AIAA Computational Fluid Dynamics Conference.
Wang Y, Akbarzadeh S, Müller JD (2015).
Stabilisation of discrete adjoint solvers for incompressible flow. 22nd AIAA Computational Fluid Dynamics Conference.
Hückelheim JC, Xu S, Gugala M, Müller JD (2015).
Time-averaged steady vs. unsteady adjoint: A comparison for cases with mild unsteadiness. 53rd AIAA Aerospace Sciences Meeting.
Xu S, Jahn W, Müller J-D(2013).
CAD-based shape optimisation with CFD using a discrete adjoint. International Journal for Numerical Methods in Fluids
Jones D, Müller JD, Bayyuk S(2012).
CFD development with automatic differentiation. 50th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition
Jaworski AB, Müller JD, Rokicki J(2012).
One-shot optimisation with grid adaptation using adjoint sensitivities (ECCOMAS 2012). ECCOMAS 2012 - European Congress on Computational Methods in Applied Sciences and Engineering, e-Book Full Papers3685-3693.
Wolf P, Staffelbach G, Gicquel LYM, Müller JD, Poinsot T(2012).
Acoustic and Large Eddy Simulation studies of azimuthal modes in annular combustion chambers. Combustion and Flame
vol. 159,
(11)
3398-3413.
Müller JD, Jitsumura M, Müller-Kronast NHF(2012).
Sensitivity of flow simulations in a cerebral aneurysm. Journal of Biomechanics
vol. 45,
(15)
2539-2548.
Wolf P, Staffelbach G, Gicquel LYM, Müller J-D, Poinsot T(2012).
Acoustic and Large Eddy Simulation studies of azimuthal modes in annular combustion chambers. Combustion and Flame
Mueller J-D, Jones D, Jahn W, Othmer C, Megahed M, Hollette N, Pierrot G, Bletzinger K-U et al.(2012).
Goal-based flow optimisation for automotive design. TRANSPORT RESEARCH ARENA 2012
vol. 48,
3599-3612.
Yu G, Müller JD, Jones D, Christakopoulos F(2011).
CAD-based shape optimisation using adjoint sensitivities. Computers and Fluids
vol. 46,
(1)
512-516.
Jones D, Müller JD, Christakopoulos F(2011).
Preparation and assembly of discrete adjoint CFD codes. Computers and Fluids
vol. 46,
(1)
282-286.
Christakopoulos F, Jones D, Mueller J-D(2011).
Pseudo-timestepping and verification for automatic differentiation derived CFD codes. COMPUTERS & FLUIDS
vol. 46,
(1)
174-179.
McConlogue T, Mueller J, Shelton J(2010).
Challenges of developing engineering students' writing through peer assessment. Engineering Education 2010: Inspiring the Next Generation of Engineers, EE 2010
Puigt G, Auffray V, Müller JD(2010).
Discretisation of diffusive fluxes on hybrid grids. Journal of Computational Physics
vol. 229,
(5)
1425-1447.
Jaworski A, Müller JD(2008).
Toward modular multigrid design optimisation. Lecture Notes in Computational Science and Engineering
vol. 64 LNCSE,
281-291.
Forsythe N, Mueller JD(2008).
Validation of a fluid-structure interaction model for a bileaflet mechanical heart valve. INT J COMPUT FLUID D
vol. 22,
(8)
541-553.
Muller JD, Cusdin P (2005).
On the performance of discrete adjoint CFD codes using automatic differentiation. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS.
vol. 47,
939-945.
Giles MB, Duta MC, Müller JD, Pierce NA(2003).
Algorithm developments for discrete adjoint methods. AIAA Journal
vol. 41,
(2)
198-205.
Müller JD (2002).
Anisotropic adaptation and multigrid for hybrid grids. International Journal for Numerical Methods in Fluids.
vol. 40,
445-455.
Moinier P, Müller JD, Giles MB(2002).
Edge-based multigrid and preconditioning for hybrid grids. AIAA Journal
vol. 40,
(10)
1954-1960.
Müller JD, Schönfeld ET, Légier JP(2001).
Adaptive local grid refinement for unsteady reacting flows. 15th AIAA Computational Fluid Dynamics Conference
Müller JD, Giles MB(2001).
Solution adaptive mesh refinement using adjoint error analysis. 15th AIAA Computational Fluid Dynamics Conference
Moinier P, Müller JD, Giles MB (1999).
Edge-based multigrid and preconditioning for hybrid grids. 14th Computational Fluid Dynamics Conference.
Müller JD, Schönfeld T, Rudgyard M (1997).
A comparison of the treatment of hanging nodes for hybrid grid refinement. 13th Computational Fluid Dynamics Conference.