Publications: Prof Kathleen Tanner
TANNER K, Kareen MM(2020).
Optimising Micro-Hydroxyapatite Reinforced Poly(lactide acid) Electrospun Scaffolds for Bone Tissue Engineering. Journal of Materials Science: Materials in Medicine
Raina DB, Širka A, Qayoom I, Teotia AK, Liu Y, Tarasevicius S, TANNER K, Isaksson H et al.(2020).
Long Term Response to a Bioactive Biphasic Biomaterial in the Femoral Neck of Osteoporotic Rats. Tissue Engineering Part A
Lidgren L, Raina DB, Tägil M, Tanner KE(2020).
Recycling implants: a sustainable solution for musculoskeletal research. Acta Orthopaedica1-1.
Williams JA, Windmill JFC, TANNER KE, Riddell JS, Coupaud S(2019).
Global and site-specific analysis of bone in a rat model of spinal cord injury-induced osteoporosis. Bone Reports
Kareem MM, Hodgkinson T, Salmeron Sanchez M, Dalby MJ, TANNER KE(2019).
Hybrid Core-Shell Scaffolds for Bone Tissue Engineering. Biomedical Materials
vol. 14,
Article 025008,
Sheafi EM, TANNER KE(2018).
Relationship between fatigue parameters and fatigue crack growth in PMMA bone cement. International Journal of Fatigue
vol. 120,
319-328.
Mustafa Z, Ishak NF, Othman R, Ahmad N, Toibah AR, Sheikh Md Fadzullah SH, TANNER KE(2018).
In-Vitro Apatite Growth on Porous β-Tricalcium Phosphate Scaffolds Coated with PHBV. Journal of Advanced Manufacturing Technology
vol. 12,
(1(4))
135-146.
Nair A, Dolan J, Tanner KE, Kerr CM, Jones B, Pollock PJ, Kellett CF(2018).
Ultrasound-guided adductor canal block: a cadaver study investigating the effect of a thigh tourniquet. British Journal of Anaesthesia
vol. 121,
(4)
890-898.
Širka A, Raina DB, Isaksson H, TANNER KE, Smailys A, Kumar A, Tarasevi¿ius Š, Tägil M et al.(2018).
Calcium Sulphate/Hydroxyapatite Carrier for Bone Formation in the Femoral Neck of Osteoporotic Rats. Tissue Engineering Part A
Mustafa Z, Ishak NF, Othman R, Ahmad N, Toibah AR, Sheikh Md Fadzullah SH, Tanner KE(2018).
In-vitro apatite growth on porous β-tricalcium phoshpate scaffolds coated with PHVB. Journal of Advanced Manufacturing Technology
vol. 12,
(Specialissue4)
135-146.
Sheafi EM, TANNER KE(2017).
S-N Analysis of Fatigue Performance of PMMA Bone Cement: Effects of Testing Specimen Variables and Stress Amplitude. International Journal of Fatigue
vol. 105,
119-127.
Adekanmbi I, Mosher CZ, Lu HH, Riehle M, Kubba H, Tanner KE(2017).
Mechanical behaviour of biodegradable AZ31 magnesium alloy after long term in vitro degradation. Materials Science and Engineering C
vol. 77,
1135-1144.
Coupaud S, Gislason MK, Purcell M, Sasagawa K, Tanner KE(2017).
Patient-specific bone mineral density distribution in the tibia of individuals with chronic spinal cord injury, derived from multi-slice peripheral Quantitative Computed Tomography (pQCT) — A cross-sectional study. Bone
vol. 97,
29-37.
TANNER KE(2017).
Hard Tissue Applications of Biocomposites. Biomedical Composites,
Editors: Ambrosio, L,
Edition. 2nd,
Woodhead Publishers
(Cambridge, UK),
CATTELL MJ, Theocharopoulos A, Bushby AJ, P¿ng KMY, TANNER KE, wilson RW(2016).
Interfacial modulus mapping of layered dental ceramics using nanoindentation. Journal of Advanced Prosthodontics
vol. 8,
(6)
Article ID JAP-2016-0162,
479-488.
Hashim AM, TANNER KE, Oleiwi JK (2016).
Biomechanics of Natural Fiber Green Composites as Internal Bone Plate rafted. MATEC Web of Conferences.
Conference: MATEC Web of Conferences
vol. 83,
Ross PD, Guy J, Selfridge J, Kamal B, Bahey N, Tanner KE, Gillingwater TH, Jones RA et al.(2016).
Exclusive expression of MeCP2 in the nervous system distinguishes between brain and peripheral Rett syndrome-like phenotypes. HUMAN MOLECULAR GENETICS
vol. 25,
(20)
4389-4404.
Tanner KE, Svensson I, Samuelsson F, Flivik G(2016).
Finite element study of the acetabulum in cemented hip arthroplasty investigating retention or removal of the subchondral bone plate. Biomedizinische Technik
vol. 61,
(5)
525-536.
Colquhoun R, Gadegaard N, Healy DM, Tanner KE(2016).
Characterisation of CorGlaes(®) Pure 107 fibres for biomedical applications. J Mater Sci Mater Med
vol. 27,
(10)
149-149.
Alfotawi R, Ayoub AF, Tanner KE, Dalby MJ, Naudi KB, McMahon J(2016).
A novel surgical approach for the reconstruction of critical-size mandibular defects using calcium sulphate/hydroxyapatite cement, BMP-7 and mesenchymal stem cells-histological assessment. Journal of Biomaterials and Tissue Engineering
vol. 6,
(1)
1-11.
Colquhoun R, Tanner KE(2015).
Mechanical behaviour of degradable phosphate glass fibres and composites - A review. Biomedical Materials (Bristol)
vol. 11,
(1)
Sheafi EM, Tanner KE(2015).
Influence of test specimen fabrication method and cross-section configuration on tension-tension fatigue life of PMMA bone cement. Journal of the Mechanical Behavior of Biomedical Materials
vol. 51,
380-387.
Fitzer SC, Zhu W, Tanner KE, Phoenix VR, Kamenos NA, Cusack M(2015).
Ocean acidification alters the material properties of Mytilus edulis shells. Journal of the Royal Society Interface
vol. 12,
(103)
Kamal B, Russell D, Payne A, Constante D, Tanner KE, Isaksson H, Mathavan N, Cobb SR(2015).
Biomechanical properties of bone in a mouse model of Rett syndrome. Bone
vol. 71,
106-114.
Al-Fotawei R, Ayoub AF, Heath N, Naudi KB, Tanner KE, Dalby MJ, McMahon J(2014).
Radiological assessment of bioengineered bone in a muscle flap for the reconstruction of critical-size mandibular defect. PLoS ONE
vol. 9,
(9)
Gislason MK, Coupaud S, Sasagawa K, Tanabe Y, Purcell M, Allan DB, Tanner KE(2014).
Prediction of risk of fracture in the tibia due to altered bone mineral density distribution resulting from disuse: A finite element study. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine
vol. 228,
(2)
165-174.
Sheafi EM, Tanner KE(2014).
Effects of test sample shape and surface production method on the fatigue behaviour of PMMA bone cement. Journal of the Mechanical Behavior of Biomedical Materials
vol. 29,
91-102.
Wang D, Lucas M, Tanner KE(2013).
Characterising the strain and temperature fields in a surrogate bone material subject to power ultrasonic excitation. Strain
vol. 49,
(5)
409-419.
Talal A, McKay IJ, Tanner KE, Hughes FJ(2013).
Effects of hydroxyapatite and PDGF concentrations on osteoblast growth in a nanohydroxyapatite-polylactic acid composite for guided tissue regeneration. Journal of Materials Science: Materials in Medicine
vol. 24,
(9)
2211-2221.
Hessle L, Stordalen GA, Wenglén C, Petzold C, Tanner EK, Brorson SH, Baekkevold ES, Önnerfjord P et al.(2013).
Erratum: The skeletal phenotype of chondroadherin deficient mice (PLoS ONE (2013) 8:7 DOI: 10.1371/annotation/cb7d7b4c-624f-46e6-957e-13b355ca8e02). PLoS ONE
vol. 8,
(7)
Hessle L, Stordalen GA, Wenglén C, Petzold C, Tanner EK, Brorson SH, Baekkevold ES, Önnerfjord P et al.(2013).
The Skeletal Phenotype of Chondroadherin Deficient Mice. PLoS ONE
vol. 8,
(6)
Vasiev I, Greer AIM, Khokhar AZ, Stormonth-Darling J, Tanner KE, Gadegaard N(2013).
Self-folding nano- and micropatterned hydrogel tissue engineering scaffolds by single step photolithographic process. Microelectronic Engineering
vol. 108,
76-81.
Alfotawi R, Naudi K, Dalby MJ, Tanner KE, Mcmahon JD, Ayoub A(2013).
Assessment of cellular viability on calcium sulphate/hydroxyapatite injectable scaffolds. Journal of Tissue Engineering
vol. 4,
(1)
1-12.
Mellon SJ, Tanner KE(2012).
Bone and its adaptation to mechanical loading: A review. International Materials Reviews
vol. 57,
(5)
235-255.
Tanner KE(2012).
Small but extremely tough. Science
vol. 336,
(6086)
1237-1238.
Gloria A, De Santis R, Ambrosio L, Tanner E(2012).
Artificial intervertebral discs. Biomaterials for Spinal Surgery,
Raucci MG, Gloria A, De Santis R, Ambrosio L, Tanner E(2012).
Introduction to biomaterials for spinal surgery.
Tanner E(2012).
Optimising the properties of injectable materials for vertebroplasty and kyphoplasty. Biomaterials for Spinal Surgery,
Savalani MM, Hao L, Dickens PM, Zhang Y, Tanner KE, Harris RA(2012).
The effects and interactions of fabrication parameters on the properties of selective laser sintered hydroxyapatite polyamide composite biomaterials. Rapid Prototyping Journal
vol. 18,
(1)
16-27.
Ambrosio L, Tanner E(2012).
Biomaterials for Spinal Surgery.
Brydone AS, Morrison DSS, Stormonth-Darling J, Meek RDM, Tanner KE, Gadegaard N(2012).
Design and fabrication of a 3D nanopatterned PEEK implant for cortical bone regeneration in a rabbit model. European Cells and Materials
vol. 24,
(SUPPL. 1)
Noailly J, Ambrosio L, Tanner KE, Planell JA, Lacroix D(2012).
In silico evaluation of a new composite disc substitute with a L3-L5 lumbar spine finite element model. European Spine Journal
vol. 21,
(SUPPL. 5)
Mustafa Z, Tanner KE (2011).
Fatigue study of self reinforced PLA filled tricalcium phospate composite. 24th European Conference on Biomaterials - Annual Conference of the European Society for Biomaterials.
Wang D, Lucas M, Tanner KE (2011).
Surrogate bone materials for assessing the effects of ultrasonic surgical devices. 24th European Conference on Biomaterials - Annual Conference of the European Society for Biomaterials.
Wang JS, Garellick G, Kjellson F, Tanner E, Flivik G(2011).
Modified femoral pressuriser generates a longer lasting high pressure during cement pressurisation. Journal of Orthopaedic Surgery and Research
vol. 6,
(1)
Gloria A, De Santis R, Ambrosio L, Causa F, Tanner KE(2011).
A multi-component fiber-reinforced PHEMA-based hydrogel/HAPEX<sup>TM</sup> device for customized intervertebral disc prosthesis. Journal of Biomaterials Applications
vol. 25,
(8)
795-810.
Huesa C, Yadav MC, Finnilä MAJ, Goodyear SR, Robins SP, Tanner KE, Aspden RM, Millán JL et al.(2011).
PHOSPHO1 is essential for mechanically competent mineralization and the avoidance of spontaneous fractures. Bone
vol. 48,
(5)
1066-1074.
Tanner KE(2010).
Bioactive composites for bone tissue engineering. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine
vol. 224,
(12)
1359-1372.
Tanner KE, Dalby MJ(2010).
Guest editorial. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine
vol. 224,
(12)
Tanner KE(2010).
Bioactive ceramic-reinforced composites for bone augmentation. Journal of the Royal Society Interface
vol. 7,
(SUPPL. 5)
Pino M, Chrzanowski W, Fabel D, Baklar M, Stingelin N, Tanner KE (2010).
Apatite deposition on naoh-treated peek and uhmwpe films for sclera materials in artificial cornea implants. Advanced Engineering Materials.
vol. 12,
Tanner KE, Wang JS, Kjellson F, Lidgren L(2010).
Comparison of two methods of fatigue testing bone cement. Acta Biomaterialia
vol. 6,
(3)
943-952.
Zou H, Syms RRA, Mellon S, Tanner KE (2009).
MEMS dielectrophoresis device for osteoblast cell stimulation. Advanced Materials Research.
vol. 60-61,
63-67.
Zhang Y, Hao L, Savalani MM, Harris RA, Di Silvio L, Tanner KE(2009).
In vitro biocompatibility of hydroxyapatite-reinforced polymeric composites manufactured by selective laser sintering. J Biomed Mater Res A
vol. 91,
(4)
1018-1027.
Talal A, Waheed N, Al-Masri M, McKay IJ, Tanner KE, Hughes FJ(2009).
Absorption and release of protein from hydroxyapatite-polylactic acid (HA-PLA) membranes. Journal of Dentistry
vol. 37,
(11)
820-826.
Tanner KE(2009).
Hard tissue applications of biocomposites. Biomedical Composites,
Kelly SE, Dalby MJ, Tanner KE, Gregory DH (2009).
Synthesis of nanoscale phosphate degradable polymer composites. European Cells and Materials.
vol. 18,
Tanner KE(2009).
Composites based on degradable polymers. Degradable Polymers for Skeletal Implants,
Talal A, Tanner KE, Billington R, Pearson GJ(2009).
Effect of ultrasound on the setting characteristics of glass ionomer cements studied by Fourier transform infrared spectroscopy. J Mater Sci Mater Med
vol. 20,
(1)
405-411.
Hao L, Savalani MM, Harris RA, Zhang Y, Tanner KE(2009).
Rapid manufacturing of bioceramic/polymer composite implants by selective laser sintering. International Journal of Computer Applications in Technology
vol. 36,
(1)
25-31.
Talal A, Tanner KE, Hughes FJ (2008).
Hydroxyapatite/polylactic acid (PLA-HA) films as covering for guided tissue regeneration membranes to obtain directional bioactive protein release. 8th World Biomaterials Congress 2008.
vol. 2,
Pino M, Stingelin-Stutzman N, Tanner E (2008).
Nucleation and growth of apatite on NaOH treated PEEK, HDPE and UHMWPE for artificial cornea materials. 8th World Biomaterials Congress 2008.
vol. 3,
Khan AS, Phillips MJ, Tanner KE, Wong FS(2008).
Comparison of the visco-elastic behavior of a pre-impregnated reinforced glass fiber composite with resin-based composite. DENT MATER
vol. 24,
(11)
1534-1538.
Pino M, Stingelin N, Tanner KE(2008).
Nucleation and growth of apatite on NaOH-treated PEEK, HDPE and UHMWPE for artificial cornea materials. ACTA BIOMATER
vol. 4,
(6)
1827-1836.
Zhang Y, Hao L, Savalani MM, Harris RA, Tanner KE(2008).
Characterization and dynamic mechanical analysis of selective laser sintered hydroxyapatite-filled polymeric composites. J Biomed Mater Res A
vol. 86,
(3)
607-616.
Zhang Y, Tanner KE(2008).
Effect of filler surface morphology on the impact behaviour of hydroxyapatite reinforced high density polyethylene composites. J MATER SCI-MATER M
vol. 19,
(2)
761-766.
Hao L, Savalani MM, Harris RA, Zhang Y, Tanner KE (2007).
Characterisation of HA/polymer bio-composite structure fabricated by selective laser sintering. Proceedings of the 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping: Virtual and Rapid Manufacturing Advanced Research Virtual and Rapid Prototyping.
121-127.
Savalani MM, Hao L, Zhang Y, Tanner KE, Harris RA(2007).
Fabrication of porous bioactive structures using the selective laser sintering technique. P I MECH ENG H
vol. 221,
(H8)
873-886.
Hao L, Savalani MM, Zhang Y, Tanner KE, Heath RJ, Harris RA(2007).
Characterization of selective laser-sintered hydroxyapatite-based biocomposite structures for bone replacement. P R SOC A
vol. 463,
(2084)
1857-1869.
Kjellson F, Abdulghani S, Tanner KE, McCarthy ID, Lidgren L(2007).
Effect of iodixanol particle size on the mechanical properties of a PMMA based bone cement. J MATER SCI-MATER M
vol. 18,
(6)
1043-1051.
Zhang Y, Tanner KE, Gurav N, Di Silvio L(2007).
In vitro osteoblastic response to 30 vol% hydroxyapatite-polyethylene composite. J BIOMED MATER RES A
vol. 81A,
(2)
409-417.
Cortes DA, Hogg PJ, Tanner KE, Ren G(2007).
Mechanical properties of carbon-fibre reinforced silicate matrix composites. MATER DESIGN
vol. 28,
(5)
1547-1554.
Zou H, Mellon S, Syms RRA, Tanner KE(2006).
2-Dimensional MEMS dielectrophoresis device for osteoblast cell stimulation. Biomed Microdevices
vol. 8,
(4)
353-359.
Osei NA, Bradley BM, Culpan P, Mitchell JB, Barry M, Tanner KE(2006).
Relationship between locking-bolt torque and load pre-tension in the llizarov frame. INJURY
vol. 37,
(10)
941-945.
Hao L, Savalani MM, Zhang Y, Tanner KE, Harris RA(2006).
Effects of material morphology and processing conditions on the characteristics of hydroxyapatite and high-density polyethylene biocomposites by selective laser sintering. P I MECH ENG L-J MAT
vol. 220,
(L3)
125-137.
Sanginario V, Ginebra MP, Tanner KE, Planell JA, Ambrosio L(2006).
Biodegradable and semi-biodegradable composite hydrogels as bone substitutes: morphology and mechanical characterization. J MATER SCI-MATER M
vol. 17,
(5)
447-454.
Hao L, Savalani MM, Zhang Y, Tanner KE, Harris RA(2006).
Selective laser sintering of hydroxyapatite reinforced polyethylene composites for bioactive implants and tissue scaffold development. P I MECH ENG H
vol. 220,
(H4)
521-531.
Joseph R, Martyn MT, Tanner KE, Coates PD(2006).
Interfacial stick-slip transition in hydroxyapatite filled high density polyethylene composite. B MATER SCI
vol. 29,
(1)
85-89.
Barker DS, Tanner KE, Ryd L(2005).
A circumferentially flanged tibial tray minimizes bone-tray shear micromotion. P I MECH ENG H
vol. 219,
(H6)
449-456.
Mehta JS, Futter CE, Sandeman SR, Faragher RGAF, Hing KA, Tanner KE, Allan BDS(2005).
Hydroxyapatite promotes superior keratocyte adhesion and proliferation in comparison with current keratoprosthesis skirt materials. Br J Ophthalmol
vol. 89,
(10)
1356-1362.
Wang JS, Diaz J, Sabokbar A, Athanasou N, Kjellson F, Tanner KE, McCarthy ID, Lidgren L(2005).
In vitro and in vivo biological responses to a novel radiopacifying agent for bone cement. J ROY SOC INTERFACE
vol. 2,
(2)
71-78.
Joseph R, Tanner KE(2005).
Effect of morphological features and surface area of hydroxyapatite on the fatigue behavior of hydroxyapatite-polyethylene composites. Biomacromolecules
vol. 6,
(2)
1021-1026.
Wang JS, Tanner KE, Abdulghani S, Lidgren L (2005).
Indentation testing of a bone defect filled with two different injectable bone substitutes. BIOCERAMICS 17.
Editors: Li, P, Zhang, K, Colwell, CW,
vol. 17,
89-92.
Xia W, Tanner KE (2004).
Dynamic mechanical properties of polylactide composites with nanograde and conventional hydroxyapatite. Transactions - 7th World Biomaterials Congress.
Zhang Y, Tanner KE, Gurav N, Di Silvio L (2004).
Effect of HA morphology on the in vitro response to hydroxyapatite- polyethylene composites. Transactions - 7th World Biomaterials Congress.
Eniwumide JO, Joseph R, Tanner KE(2004).
Effect of particle morphology and polyethylene molecular weight on the fracture toughness of hydroxyapatite reinforced polyethylene composite. J Mater Sci Mater Med
vol. 15,
(10)
1147-1152.
Kjellson F, Almén T, Tanner KE, McCarthy ID, Lidgren L(2004).
Bone cement X-ray contrast media: A clinically relevant method of measuring their efficacy. Journal of Biomedical Materials Research - Part B Applied Biomaterials
vol. 70,
(2)
354-361.
Silwood CJL, Chikanza IC, Tanner KE, Shelton JC, Bowsher JG, Grootveld M(2004).
Investigation of the molecular nature of low-molecular-mass cobalt(II) ions in isolated osteoarthritic knee-joint synovial fluid. Free Radic Res
vol. 38,
(6)
561-571.
TANNER KE, Lidgren L, Wielanek L, Wang J-S, Nilsson M(2004).
Biodegradation and Biocompatibility of a Calcium Sulphate-Hydroxyapatite Bone Substitute. Journal of Bone and Joint Surgery
vol. 86-B,
(1)
120-125.
Nilsson M, Wang JS, Wielanek L, Tanner KE, Lidgren L(2004).
Biodegradation and biocompatability of a calcium sulphate-hydroxyapatite bone substitute. Journal of Bone and Joint Surgery - Series B
vol. 86,
(1)
120-125.
TANNER KE, Lidgren L, Almen T, Kjellson F, McCarthy ID(2004).
Bone Cement X-ray Contrast Media: A Clinically Relevant Method of Measuring their Efficacy. Journal of Biomedical Materials Research
vol. 70B,
(2)
354-371.
TANNER KE, Wang J-S, Lidgren L, McCarthy ID, Kjellson F, Diaz J, Sabokbar A(2004).
In Vitro and In Vivo Biological Responses to a Vovel Radiopacifing Agent for Bone Cement. Journal of the Royal Society: Interface
Hing KA, Best SM, Tanner KE, Bonfield W, Revell PA(2004).
Mediation of bone ingrowth in porous hydroxyapatite bone graft substitutes. J Biomed Mater Res A
vol. 68,
(1)
187-200.
HING KA, Tanner KE, Best SM, Bonfield W, Revell PA(2004).
Mediation of bone ingrowth in porous hydroxyaptite bone graft substitutes. Journal of Biomedical Materials Research
vol. 68A,
187-200.
Vashishth D, Tanner KE, Bonfield W(2003).
Experimental validation of a microcracking-based toughening mechanism for cortical bone. J BIOMECH
vol. 36,
(1)
121-124.
TANNER KE, Wielanek L, Lidgren L, Nilsson M, Wang JS(2003).
Factors Influencing the Compressive Strength of an Injectable Calcium Sulfate-Hydroxyapatite Cement. Journal of Materials Science: Materials in Medicine
vol. 14,
(5)
399-404.
Zhang Y, Tanner KE(2003).
Impact behavior of hydroxyapatite reinforced polyethylene composites. J MATER SCI-MATER M
vol. 14,
(1)
63-68.
TANNER KE(2003).
Modulus Matched Materials for Medical Applications. Proceedings of 5th International Conference on Modern Practice in Stress and Vibration Analysis. Cartmell, MP (ed),
Trans tech Publications
(Switzerland),
Tanner KE (2003).
Modulus matched materials for medical applications. MODERN PRACTICE IN STRESS AND VIBRATION ANALYSIS.
Editors: Cartmell, MP,
vol. 440-4,
19-26.
Olsson O, Tanner KE, Ceder L, Ryd L(2002).
A biomechanical study on fixation stability with twin hook or lag screw in artificial cancellous bone. INT ORTHOP
vol. 26,
(6)
349-355.
Joseph R, McGregor WJ, Martyn MT, Tanner KE, Coates PD(2002).
Effect of hydroxyapatite morphology/surface area on the rheology and processability of hydroxyapatite filled polyethylene composites. Biomaterials
vol. 23,
(21)
4295-4302.
Rich J, Tuominen J, Kylma J, Seppala J, Nazhat SN, Tanner KE(2002).
Lactic acid based PEU/HA and PEU/BCP composites: Dynamic mechanical characterization of hydrolysis. J BIOMED MATER RES
vol. 63,
(3)
346-353.
Bleach NC, Nazhat SN, Tanner KE, Kellomaki M, Tormala P(2002).
Effect of filler content on mechanical and dynamic mechanical properties of particulate biphasic calcium phosphate-polylactide composites. BIOMATERIALS
vol. 23,
(7)
1579-1585.
Joseph R, McGregor WJ, Martyn MT, Tanner KE, Coates PD, Bonfield W(2002).
Effect of polymer matrix on the rheology of hydroxyapatite-filled polyethylene composites. POLYM ENG SCI
vol. 42,
(2)
326-335.
Bonner M, Saunders LS, Ward IM, Davies GW, Wang M, Tanner KE, Bonfield W(2002).
Anisotropic mechanical properties of oriented HAPEX (TM). J MATER SCI
vol. 37,
(2)
325-334.
Lauge-Pedersen H, Aspenberg P, Ryd L, Tanner KE(2002).
Arch-shaped versus flat arthrodesis of the ankle joint: strength measurements using synthetic cancellous bone. P I MECH ENG H
vol. 216,
(H1)
43-49.
TANNER KE, Ryd L, Lauge-Pederson H, Aspenberg P(2002).
Dome-shaped versus Flat Arthrodesis of the Ankle Joint: Strength Measurements using Synthetic Cancellous Bone. Proceedings of the Institution of Mechanical Engineers: Part H, Engineering in Medicine
vol. 216-H,
(1)
43-49.
Thompson MS, Northmore-Ball MD, Tanner KE(2002).
Effects of acetabular resurfacing component material and fixation on the strain distribution in the pelvis. P I MECH ENG H
vol. 216,
(H4)
237-245.
Hogg PJ, TANNER KE, Cortes DA, Escobedo JC(2002).
Mechanical Properties of a Novel Bioactive Ceramic Systemtem. Archives of Metallurgy
vol. 47,
(4)
409-419.
Cortes DA, Hogg PJ, Tanner KE, Escobedo JC(2002).
Mechanical properties of a novel bioactive ceramic system. ARCH METALL
vol. 47,
(4)
409-419.
Yuan X, Ryd L, Tanner KE, Lidgren L(2002).
Roentgen single-plane photogrammetric analysis (RSPA). Journal of Bone and Joint Surgery - Series B
vol. 84,
(6)
908-914.
TANNER KE, Lidgren L, Yuan X, Ryd L(2002).
Rontgen Single-Plane Stereophotogrammetric Analysis (RSPA). A New Approach for the STudy of Musculo-Skeletal Movement. Journal of Bone and Joint Surgery
vol. 84-B,
(6)
908-914.
TANNER KE, Znaor N, Goodship AE, Gaughan EM, DeBowes RM, Murray RC(2002).
The Effect of Intra-articular Methylprednisolone Acetate and Exercise on Equine Carpal Subchondral and Cancellous Bone Microhardness. Equine Veterinary Journal
vol. 34,
(3)
306-310.
Vashishth D, Tanner KE, Bonfield W(2001).
Fatigue of cortical bone under combined axial-torsional loading. J ORTHOPAED RES
vol. 19,
(3)
414-420.
Tanner KE(2001).
A quarter century of European Biomaterials Conferences. J MATER SCI-MATER M
vol. 12,
(10-12)
847-848.
TANNER KE, Bonfield W, Joseph R, Martyn MT (2001).
Apparent Extensional Properties of Injection Moulding Grade Polyethylenes filled with Hydroxyapatite.
Conference: Proceedings of ANTEC 200 Annual Conference, Dallas, USA
Nazhat SN, Kellomäki M, Törmälä P, Tanner KE, Bonfield W(2001).
Dynamic mechanical characterization of biodegradable composites of hydroxyapatite and polylactides. J Biomed Mater Res
vol. 58,
(4)
335-343.
TANNER KE(2001).
Editorial: A QuaterCentury of European Biomaterials Conference. Journal of materials Science: Matrials in Medicine
vol. 12,
(10-12)
847-848.
Bleach NC, Tanner KE, Kellomaki M, Tormala P(2001).
Effect of filler type on the mechanical properties of self-reinforced polylactide-calcium phosphate composites. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
vol. 12,
(10-12)
911-915.
Ton That PT, Bonfield W, Ward IM, TANNER KE, McGregor WJ (2001).
Fatigue of HAPEX (TM): A Structural Bone Replacement Material. 229-237.
Tanner KE, McGregor WJ, That PTT, Ward IM, Bonfield W (2001).
Fatigue of Hapex (TM) - A structural bone replacement material. STRUCTURAL BIOMATERIALS FOR THE 21ST CENTURY.
Editors: Niinomi, M, Okabe, T, Taleff, EM, Lesuer, DR et al.,
229-237.
Bonner M, Ward IM, McGregor W, Tanner KE, Bonfield W(2001).
Hydroxyapatite/polypropylene composite: A novel bone substitute material. J MATER SCI LETT
vol. 20,
(22)
2049-2051.
TANNER KE, Bonfield W, Joseph R (2001).
Influence of filler structure/morphology on the mechanical properties of a bioactive composite.
Conference: Proceedings of the International Conference on Biomedical Engineering, Bangalore, India
Joseph R, Martyn MT, Tanner KE, Coates PD, Bonfield W(2001).
Rheological characterisation of hydroxyapatite filled polyethylene composites Part 1 - Shear and extensional behaviour. PLAST RUBBER COMPOS
vol. 30,
(5)
197-204.
Joseph R, Martyn MT, Tanner KE, Coates PD, Bonfield W(2001).
Rheological characterisation of hydroxyapatite filled polyethylene composites Part 2 - Isothermal compressibility and wall slip. PLAST RUBBER COMPOS
vol. 30,
(5)
205-212.
TANNER KE, Kjellson F, Lidgren L, Klaveness J, Almen T, Wang J-S, Mattson A(2001).
Tensile Mechanical Properties of a Bone Cement containing Non-Ionic Contrast Media. Journal of Materials Science: Materials in Medicine
vol. 12,
(10-12)
889-894.
TANNER KE, Thompson MS, Northmore-Ball MD(2001).
Tensile mechanical Properties of Polyacetal after 1 and 6 months immersion in Ringer's solution. Journal of Materials Science: Materials in Medicine
vol. 12,
(10-12)
883-888.
Thompson MS, Northmore-Ball MD, Tanner KE (2001).
Tensile mechanical properties of polyacetal after one and six months' immersion in Ringer's solution. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE.
vol. 12,
883-887.
Kjellson F, Wang JS, Almen T, Mattsson A, Klaveness J, Tanner KE, Lidgren L (2001).
Tensile properties of a bone cement containing non-ionic contrast media. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE.
vol. 12,
889-894.
Thompson MS, Dawson T, Kuiper JH, Northmore-Ball MD, Tanner KE(2000).
Acetabular morphology and resurfacing design. Journal of Biomechanics
vol. 33,
(12)
1645-1653.
De Santis R, Anderson P, Tanner KE, Ambrosio L, Nicolais L, Bonfield W, Davis GR(2000).
Bone fracture analysis on the short rod chevron-notch specimens using the X-ray computer micro-tomography. Journal of Materials Science: Materials in Medicine
vol. 11,
(10)
629-636.
McGregor WJ, Tanner KE, Bonfield W, Bonner MJ, Saunders LS, Ward IM(2000).
Fatigue properties of isotropic and hydrostatically extruded HAPEX<sup>TM</sup>. Journal of Materials Science Letters
vol. 19,
(20)
1787-1788.
Ton That PT, Tanner KE, Bonfield W(2000).
Fatigue characterization of a hydroxyapatite-reinforced polyethylene composite. I. Uniaxial fatigue. Journal of Biomedical Materials Research
vol. 51,
(3)
453-460.
Ton That PT, Tanner KE, Bonfield W(2000).
Fatigue characterization of a hydroxyapatite-reinforced polyethylene composite. II. Biaxial fatigue. Journal of Biomedical Materials Research
vol. 51,
(3)
461-468.
Vashishth D, Tanner KE, Bonfield W(2000).
Contribution, development and morphology of microcracking in cortical bone during crack propagation. Journal of Biomechanics
vol. 33,
(9)
1169-1174.
Nazhat SN, Joseph R, Wang M, Smith R, Tanner KE, Bonfield W(2000).
Dynamic mechanical characterization of hydroxyapatite reinforced polyethylene: Effect of particle size. Journal of Materials Science: Materials in Medicine
vol. 11,
(10)
621-628.
Wang M, Ladizesky NH, Tanner KE, Ward IM, Bonfield W(2000).
Hydrostatically extruded HAPEX<sup>TM</sup>. Journal of Materials Science
vol. 35,
(4)
1023-1030.
Cortes D, Hogg PJ, Tanner KE (2000).
The effect of HMW polyethylene powder and carbon fibres on the mechanical properties of a ceramic bioactive system. UKSB First Annual Conference 6-7th July 2000.
New AMR, Northmore-Ball MD, Tanner KE, Cheah SK(1999).
In vivo measurement of acetabular cement pressurization using a simple new design of cement pressurizer. Journal of Arthroplasty
vol. 14,
(7)
854-859.
Hing KA, Best SM, Tanner KE, Bonfield W, Revell PA(1999).
Quantification of bone ingrowth within bone-derived porous hydroxyapatite implants of varying density. Journal of Materials Science: Materials in Medicine
vol. 10,
(10-11)
663-670.
Sala M, Taylor M, Tanner KE(1999).
Torsional stability of primary total knee replacement tibial prostheses: A biomechanical study in cadaveric bone. Journal of Arthroplasty
vol. 14,
(5)
610-615.
Borzacchiello A, Ambrosio L, Nicolais L, Harper EJ, Tanner KE, Bonfield W(1998).
Comparison between the polymerization behavior of a new bone cement and a commercial one: Modeling and in vitro analysis. Journal of Materials Science: Materials in Medicine
vol. 9,
(12)
835-838.
Borzacchiello A, Ambrosio L, Nicolais L, Harper EJ, Tanner KE, Bonfield W(1998).
Isothermal and non-isothermal polymerization of a new bone cement. Journal of Materials Science: Materials in Medicine
vol. 9,
(6)
317-324.
Bonfield W, Wang M, Tanner KE(1998).
Interfaces in analogue biomaterials. Acta Materialia
vol. 46,
(7)
2509-2518.
Taylor M, Tanner KE, Freeman MAR(1998).
Finite element analysis of the implanted proximal tibia: A relationship between the initial cancellous bone stresses and implant migration. Journal of Biomechanics
vol. 31,
(4)
303-310.
New AMR, Kloss M, Northmore-Ball MD, Kuiper JH, Tanner KE, Veldkamp E (1998).
Dynamic mechanical testing of prosthetic acetabular components. EXPERIMENTAL MECHANICS, VOLS 1 AND 2.
839-844.
New AMR, Northmore-Ball MD, Tanner KE (1998).
Finite element modelling of bone cement flow during acetabular component insertion in hip replacement. COMPUTER METHODS IN BIOMECHANICS & BIOMEDICAL ENGINEERING - 2.
155-162.
Hing KA, Best SM, Tanner KE, Réveil PA, Bonfield W(1998).
Histomorphological and biomechanical characterization of calcium phosphates in the osseous environment. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine
vol. 212,
(6)
437-451.
Suwanprateeb J, Tanner KE, Turner S, Bonfield W(1998).
Influence of sterilization by gamma irradiation and of thermal annealing on creep of hydroxyapatite-reinforced polyethylene composites. Journal of Biomedical Materials Research
vol. 39,
(1)
16-22.
Tanner E, Planell J(1998).
Special issue on biomaterials: Part 1. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE
vol. 212,
(H2)
I-II.
Tanner KE, Planell JA(1998).
Special issue on biomaterials: Part 2. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE
vol. 212,
(H6)
I-II.
Hing KA, Best SM, Tanner KE, Bonfield W, Revell PA(1997).
Biomechanical assessment of bone ingrowth in porous hydroxyapatite. Journal of Materials Science: Materials in Medicine
vol. 8,
(12)
731-736.
Huang J, Di Silvio L, Wang M, Tanner KE, Bonfield W (1997).
In vitro mechanical and biological assessment of hydroxyapatite-reinforced polyethylene composite. Journal of Materials Science: Materials in Medicine.
vol. 8,
775-779.
Suwanprateeb J, Tanner KE, Turner S, Bonfield W(1997).
Influence of Ringer's solution on creep resistance of hydroxyapatite reinforced polyethylene composites. Journal of Materials Science: Materials in Medicine
vol. 8,
(8)
469-472.
Bonfield W, Tanner KE(1997).
Biomaterials - A new generation. MATERIALS WORLD
vol. 5,
(1)
18-20.
Revell PA, Tanner KE, Bonfield W (1997).
Bone growth into implants of hydroxyapatite-coated titanium and hydroxyapatite-polyethylene composite implants. JOURNAL OF PATHOLOGY.
vol. 181,
A12-A12.
Taylor M, Tanner KE(1997).
Fatigue failure of cancellous bone: A possible cause of implant migration and loosening. Journal of Bone and Joint Surgery - Series B
vol. 79,
(SUPPL. 2)
181-182.
Huang J, Di Silvio L, Wang M, Tanner KE, Bonfield W (1997).
In vitro assessment of hydroxyapatite- and Bioglass (R)-reinforced polyethylene composites. BIOCERAMICS, VOL 10.
519-522.
Revell PA, Hing KA, Tanner KE, Best SM, Bonfield W (1997).
Osseointegration of porous hydroxyapatite. BONE GRAFT SUBSTITUTES AND GROWTH FACTORS.
28-30.
Taylor ME, Tanner KE, Freeman MAR, Yettram AL(1997).
Stress and strain distribution within the intact femur: Compression or bending? Response. MEDICAL ENGINEERING & PHYSICS
vol. 19,
(1)
99-100.
Nazhat SN, Smith R, Tanner KE, Bonfield W (1996).
Dynamic mechanical analysis of hydroxyapatite reinforced polyethylene. Transactions of the Annual Meeting of the Society for Biomaterials in conjunction with the International Biomaterials Symposium.
vol. 2,
Nazhat SN, Smith R, Deb S, Wang M, Tanner KE, Bonfield W (1996).
Dynamic mechanical behaviour of modified hydroxyapatite reinforced polyethylene composites. Transactions of the Annual Meeting of the Society for Biomaterials in conjunction with the International Biomaterials Symposium.
vol. 2,
Hing KA, Best SM, Revell PA, Tanner KE, Bonfield W(1996).
Histomorphometric and biomechanical assessment of bone ingrowth in porous hydroxyapatite. Transactions of the Annual Meeting of the Society for Biomaterials in conjunction with the International Biomaterials Symposium
vol. 2,
Ladizesky NH, Wang M, Miettinen EM, Tanner KE, Ward IM, Bonfield W (1996).
Hydrostatic extrusion of hydroxyapatite polyethylene composite. Transactions of the Annual Meeting of the Society for Biomaterials in conjunction with the International Biomaterials Symposium.
vol. 2,
Gross U, Boyde A, Hahn M, Labey L, Merolli A, Meunier A, Revell PA, Tanner KE et al. (1996).
Implant retrieval - a multi centre, multidisciplinary study. Transactions of the Annual Meeting of the Society for Biomaterials in conjunction with the International Biomaterials Symposium.
vol. 1,
Labey L, Gross U, Boyde A, Hahn M, Merolli A, Meunier A, Revell P, Tanner K et al. (1996).
Mechanical evaluation of explanted hip prostheses: Technique and first results. Transactions of the Annual Meeting of the Society for Biomaterials in conjunction with the International Biomaterials Symposium.
vol. 2,
Deb S, Wang M, Tanner KE, Bonfield W(1996).
Hydroxyapatite-polyethylene composites: Effect of grafting and surface treatment of hydroxyapatite. Journal of Materials Science: Materials in Medicine
vol. 7,
(4)
191-193.
Taylor ME, Tanner KE, Freeman MAR, Yettram AL(1996).
Stress and strain distribution within the intact femur: Compression or bending?. Medical Engineering and Physics
vol. 18,
(2)
122-131.
Suwanprateeb, Tanner KE, Turner S, Bonfield W(1995).
Creep in polyethylene and hydroxyapatite reinforced polyethylene composites. Journal of Materials Science: Materials in Medicine
vol. 6,
(12)
804-807.
Taylor M, Tanner KE, Freeman MAR, Yettram AL (1995).
Finite element modelling-predictor of implant survival?. Journal of Materials Science: Materials in Medicine.
vol. 6,
808-812.
Taylor M, Tanner KE, Freeman MAR, Yettram AL(1995).
Cancellous bone stresses surrounding the femoral component of a hip prosthesis: an elastic-plastic finite element analysis. Medical Engineering and Physics
vol. 17,
(7)
544-550.
Tanner K, Yettram AL, Loeffler M, Goodier WD, Freeman MAR, Bonfield W(1995).
Erratum: Is stem length important in uncemented endoprostheses? (Med. Eng. Phys. 1995; 17: (291-296)). Medical Engineering and Physics
vol. 17,
(6)
Tanner KE, Yettram AL, Loeffler M, Goodier WD, Freeman MAR, Bonfield W(1995).
Is stem length important in uncemented endoprostheses?. Medical Engineering and Physics
vol. 17,
(4)
291-296.
Tanner KE, Downes RN, Bonfield W (1994).
Clinical applications of hydroxyapatite reinforced materials. British Ceramic Transactions.
vol. 93,
104-107.
(1992).
Factors affecting the strength of flexor tendon repair. Journal of Hand Surgery
vol. 17 B,
(5)
550-552.
Bhatia D, Tanner KE, Bonfield W, Citron ND(1992).
Factors Affecting the Strength of Flexor Tendon Repair. Journal of Hand Surgery (British and European Volume)
vol. 17,
(5)
550-552.
Doyle C, Tanner ET, Bonfield W(1991).
In vitro and in vivo evaluation of polyhydroxybutyrate and of polyhydroxybutyrate reinforced with hydroxyapatite. Biomaterials
vol. 12,
(9)
841-847.
Deligianni DD, Missirlis YF, Tanner KE, Bonfield W(1991).
Mechanical behaviour of trabecular bone of the human femoral head in females. Journal of Materials Science: Materials in Medicine
vol. 2,
(3)
168-175.
Tanner KE, Warren NP, Coombs RR(1991).
Ochronosis of the hip joint case report with biomechanical study. Scandinavian Journal of Rheumatology
vol. 20,
(1)
63-64.
DOYLE C, LUKLINSKA ZB, TANNER KE, BONFIELD W (1990).
AN ULTRA-STRUCTURAL STUDY OF THE INTERFACE BETWEEN HYDROXYAPATITE POLYMER COMPOSITE AND BONE. CLINICAL IMPLANT MATERIALS.
vol. 9,
339-344.
Sharp DJ, Tanner KE, Bonfield W(1990).
Measurement of the density of trabecular bone. Journal of Biomechanics
vol. 23,
(8)
853-857.
TANNER KE, DOYLE C, BONFIELD W (1990).
THE STRENGTH OF THE INTERFACE DEVELOPED BETWEEN BIOMATERIALS AND BONE. CLINICAL IMPLANT MATERIALS.
vol. 9,
149-154.
Nunn D, Freeman MAR, Tanner KE, Bonfield W(1989).
Torsional stability of the femoral component of hip arthroplasty. Response to an anteriorly applied load. Journal of Bone and Joint Surgery - Series B
vol. 71,
(3)
452-455.
Tanner KE, Reed PE, Bonfield W, Rasmussen GL, Freeman MAR(1988).
A system for modelling forces on the hip joint in one-legged stance. Journal of Biomedical Engineering
vol. 10,
(3)
289-290.
Tanner KE, Bonfield W, Nunn D, Freeman MAR(1988).
Rotational movement of femoral components of total hip replacements in response to an anteriorly applied load. Engineering in Medicine
vol. 17,
(3)
127-129.
Bonfield W, Doyle C, Tanner KE (1986).
IN VIVO EVALUATION OF HYDROXYAPATITE REINFORCED POLYETHYLENE COMPOSITES. Advances in Biomaterials.
153-158.
Doyle C, Tanner KE, Bonfield W (1985).
IMMUNOFLUORESCENT LABELLING TO MONITOR BONE GROWTH KINETICS AT THE IMPLANT/BONE INTERFACE.
Churches AE, Tanner KE, Harris JD(1985).
An engineering evaluation of the Oxford external fixator with sliding clamps: fixator stiffness and fracture healing assessment. Engineering in Medicine
vol. 14,
(1)
21-29.
Churches AE, Tanner KE, Evans M, Gwillim J(1985).
Fracture healing assessment with External Fixation. Engineering in Medicine
vol. 14,
(1)
13-20.
DOYLE C, BONFIELD W, TANNER KE, SHARP DJ, COOMBS RRH (1985).
THE ELASTICITY OF SUBCHONDRAL BONE AND THE ETIOLOGY OF OSTEO-ARTHRITIS. JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME.
vol. 67,
843-843.
Churches AE, Tanner KE, Harris JD(1985).
The Oxford External Fixator: fixator stiffness and the effects of bone pin loosening. Engineering in Medicine
vol. 14,
(1)
3-11.
Harris JD, Kenwright J, Evans M, Tanner KE, Gwillim J(1984).
Control of movement and fracture stiffness monitoring with external fixation. Orthopedics
vol. 7,
(3)
485-490.
Evans M, Kenwright J, Tanner KE(1979).
Analysis of single-sided external fracture fixation. Engineering in Medicine
vol. 8,
(3)
133-137.