Publications: Dr Han Zhang

Dong M, Bilotti E, Zhang H, Papageorgiou DG ( 2024 ) . Sustainable Gelatin‐Based Nanocomposite Packaging Films with Enhanced Physical Properties and Inherent Recyclability . Advanced Sustainable Systems

Nazir MU, Mascolo R, Bouic P, Hassan MM, Harris J, Naderizadeh S, Busfield JJC, Zhang H et al. ( 2024 ) . Upcycling leather waste: The effect of leather type and aspect ratio on the performance of thermoplastic polyurethane composites . Sustainable Materials and Technologies

Thorn TDS, Wang Y, Guo H, Lu L, Liu Y, Bilotti E, Papageorgiou DG, Zhang H ( 2024 ) . Discontinuous interleaving strategies for toughening, damage sensing and repair in multifunctional carbon fibre/epoxy composites . Composites Part A Applied Science and Manufacturing vol. 185 ,

Dong M, Soul A, Li Y, Bilotti E, Zhang H, Cataldi P, Papageorgiou DG ( 2024 ) . Transient Starch‐Based Nanocomposites for Sustainable Electronics and Multifunctional Sensing . Advanced Functional Materials vol. 35 , ( 1 )

Dong M, Bilotti E, Zhang H, Boland CS, Papageorgiou DG ( 2024 ) . High performing piezoresistive MoS2/epoxy strain sensors for structural health monitoring . Polymer vol. 309 ,

Ekbatani S, Wang Y, Huo S, Papageorgiou D, Zhang H ( 2024 ) . Nano-engineered hierarchical natural fibre composites with localised cellulose nanocrystals and tailored interphase for improved mechanical properties . Composites Science and Technology vol. 255 ,

Wang Y, Das B, Thorn TDS, Huo S, Evans J, Newton M, Liu Y, Advani SG et al. ( 2024 ) . Towards highly homogeneous self-regulating heating of smart nanocomposites . Applied Materials Today vol. 39 ,

Dong M, Mastroianni G, Bilotti E, Zhang H, Papageorgiou DG ( 2024 ) . Biodegradable Starch-Based Nanocomposite Films with Exceptional Water and Oxygen Barrier Properties . ACS Sustainable Chemistry & Engineering vol. 12 , ( 29 ) 11056 - 11066 .

Das B, Yu X, Wang Y, Porwal H, Evans J, Newton M, Papageorgiou D, Zhang H et al. ( 2024 ) . High temperature co-polyester thermoplastic elastomer nanocomposites for flexible self-regulating heating devices . Materials & Design vol. 242 ,

Hu Y, Chen J, Yang G, Li Y, Dong M, Li Q, Yuan H, Zhang H et al. ( 2024 ) . In-situ hybridization of an epoxy resin using polyurethane and MXene nanoplatelets for thermally stable nanocomposites with improved strength and toughness . Polymer vol. 302 ,

Wu L, Huang X, Wang M, Chen J, Chang J, Zhang H, Zhang X, Conn A et al. ( 2024 ) . Tunable Light-Responsive Polyurethane-urea Elastomer Driven by Photochemical and Photothermal Coupling Mechanism . ACS Applied Materials & Interfaces vol. 16 , ( 15 ) 19480 - 19495 .

Dong M, Bilotti E, Zhang H, Papageorgiou DG ( 2024 ) . Multifunctional Ti3C2Tx MXene-reinforced thermoplastic starch nanocomposites for sustainable packaging solutions . International Journal of Biological Macromolecules vol. 265 , ( Pt 2 )

Hu Y, Yang G, Chen J, Li Y, Dong M, Zhang H, Bilotti E, Jiang J et al. ( 2024 ) . Interfacial engineering of hybrid MXene-Ni-CF tri-core–shell composites for electromagnetic interference shielding and E-heating applications . Composites Part A Applied Science and Manufacturing vol. 178 ,

Hu Y, Chen J, Yang G, Li Y, Dong M, Zhang H, Bilotti E, Jiang J et al. ( 2024 ) . Highly conductive and mechanically robust MXene@CF core-shell composites for in-situ damage sensing and electromagnetic interference shielding . Composites Science and Technology vol. 246 ,

Dong M, Tomes O, Soul A, Hu Y, Bilotti E, Zhang H, Papageorgiou DG ( 2024 ) . Hybrid Ti3C2T x MXene and Carbon Nanotube Reinforced Epoxy Nanocomposites for Self-Sensing and Structural Health Monitoring . ACS Applied Nano Materials vol. 7 , ( 3 ) 3314 - 3325 .

Tomes O, Soul A, Zhang H, Bilotti E, Papageorgiou DG ( 2024 ) . A novel electrical depercolation model for stretchable nanocomposite strain sensors . Nanoscale vol. 16 , ( 12 ) 6163 - 6175 .

Dong M, Hu Y, Yu X, Liu M, Bilotti E, Zhang H, Papageorgiou DG ( 2024 ) . Probing Interfacial Interactions in Ternary Nanocomposites of Ti3C2T x MXene Nanoplatelets, Multiwalled Carbon Nanotubes, and Poly(vinyl alcohol) toward Synergistic Reinforcement . ACS Applied Polymer Materials vol. 6 , ( 1 ) 207 - 217 .

Zeng C, Chen K, Koz C, Stefanaki E-C, Galindez ESS, Zhang H, Fenwick O, Tuley R et al. ( 2023 ) . Kirigami-inspired organic and inorganic film-based flexible thermoelectric devices with built-in heat sink . Nano Energy vol. 121 , 109213 - 109213 .

Klayya S, Pripdeevech P, Zhang H, Bilotti E, Soykeabkaew N ( 2023 ) . Improved dispersibility of nanofibrillated cellulose via simple microwave-assisted esterification . Nanocomposites vol. 9 , ( 1 ) 171 - 182 .

Dong M, Hu Y, Zhang H, Bilotti E, Pugno N, Dunstan D, Papageorgiou DG ( 2023 ) . Micromechanics of Ti<inf>3</inf>C<inf>2</inf>T<inf>x</inf> MXene reinforced poly(vinyl alcohol) nanocomposites . Composites Part C: Open Access vol. 13 ,

Hu Y, Chen J, Yang G, Li Y, Dong M, Li Q, Yuan H, Zhang H et al. ( 2023 ) . In-Situ Hybridization of an Epoxy Resin Using Polyurethane and Mxene Nanoplatelets for Improved Strength and Toughness .

Li H, Zhang C, Li P, Liu S, Zhang H, He C ( 2023 ) . Recent development in flexible organic thermoelectric fibers for wearable devices . Materials Today Chemistry vol. 34 ,

Yao X, Wang Y, Thorn TDS, Huo S, Papageorgiou DG, Liu Y, Bilotti E, Zhang H ( 2023 ) . Tailored Out-of-Oven Energy Efficient Manufacturing of High-Performance Composites with Two-Stage Self-Regulating Heating via a Double Positive Temperature Coefficient Effect . ACS Applied Materials & Interfaces vol. 15 , ( 48 ) 56265 - 56274 .

Zeng C, Chen K, Koz C, Stefanaki E-C, Galindez ESS, Zhang H, Fenwick O, Tuley R et al. ( 2023 ) . Kirigami-Inspired Organic and Inorganic Film-Based Flexible Thermoelectric Devices with Built-In Heat Sink .

Liu R, Zhu X, Liu S, Ouyang D, Ma X, Xia F, Yu Y, Zhang H et al. ( 2023 ) . Interface-engineered Au@MoS2 core-shell heterostructures with superior hot-carrier transfer dynamics for plasmonics and optoelectronics . Science China Materials vol. 66 , ( 10 ) 3931 - 3940 .

Wan K, Kernin A, Ventura L, Zeng C, Wang Y, Liu Y, Vilatela JJ, Lu W et al. ( 2023 ) . Toward Self-Powered Sensing and Thermal Energy Harvesting in High-Performance Composites via Self-Folded Carbon Nanotube Honeycomb Structures . ACS applied materials &amp; interfaces vol. 15 , ( 37 ) 44212 - 44223 .

Yu X, Steiner P, Zhou Q, Kocabas C, Zhang H, Papageorgiou DG, Fenwick O, Yan H et al. ( 2023 ) . Simultaneous Increase in Dielectric Breakdown Strength and Thermal Conductivity of Oriented UHMWPE Containing Diamond Nanoparticles . Macromolecules

Wang Y, Yao X, Thorn TDS, Huo S, Porwal H, Newton M, Liu Y, Papageorgiou D et al. ( 2023 ) . Energy efficient out-of-oven manufacturing of natural fibre composites with integrated sensing capabilities and improved water barrier properties . Composites Science and Technology vol. 239 ,

He Q, Li X, Zhang H, Briscoe J ( 2023 ) . Nano‐Engineered Carbon Fibre‐Based Piezoelectric Smart Composites for Energy Harvesting and Self‐Powered Sensing . Advanced Functional Materials vol. 33 , ( 20 )

Thorn TDS, Liu Y, Yao X, Papageorgiou DG, Robinson P, Bilotti E, Peijs T, Zhang H ( 2023 ) . Smart and repeatable easy-repairing and self-sensing composites with enhanced mechanical performance for extended components life . Composites Part A Applied Science and Manufacturing vol. 165 ,

Huo S, Wang Y, Yao X, Liu Y, Bilotti E, Zhang H ( 2023 ) . ENERGY EFFICIENT MANUFACTURING OF HIGH PERFORMANCE COMPOSITES BASED ON RECYCLED CARBON FIBRE . ICCM International Conferences on Composite Materials .

Soul A, Zhang H, Bilotti E, Papageorgiou D ( 2023 ) . Hybrid, Multifunctional 3D Printed Nanocomposite Strain Sensors . ICCM International Conferences on Composite Materials .

Ekbatani S, Huo S, Papageorgiou DG, Zhang H ( 2023 ) . NANO-ENGINEERED CNC/FLAX/BIO-EPOXY HIERARCHICAL COMPOSITES . ICCM International Conferences on Composite Materials .

Zeng C, Bilotti E, Zhang H ( 2023 ) . Optimization of Thermoelectric Properties of Carbon nanotube (CNT) veils by Defect Engineering . ICCM International Conferences on Composite Materials .

Zeng C, Stenier P, Chen K, Wan K, Dong M, Li S, Kocabas C, Reece MJ et al. ( 2023 ) . Optimization of thermoelectric properties of carbon nanotube veils by defect engineering . Materials Horizons vol. 10 , ( 9 ) 3601 - 3609 .

Wang Y, Yao X, Liu Y, Bilotti E, Zhang H ( 2023 ) . Out-of-oven Manufacturing for Natural Fibre Composites with Integrated Deformation Sensing . ICCM International Conferences on Composite Materials .

Zhang H, Liu Y, Wang Y, Yao X, Huo S, Bilotti E, Peijs T ( 2023 ) . SUSTAINABLE MULTIFUNCTIONAL COMPOSITES: FROM ENERGY EFFICIENT MANUFACTURING TO SMART APPLICATIONS . ICCM International Conferences on Composite Materials .

Tomes O, Zhang H, Bilotti E, Liu M, Papageorgiou DG ( 2023 ) . Ultrasoft Multifunctional Nanocomposites for Wearable Electronics . ICCM International Conferences on Composite Materials .

Zhang X, Qu S, Yang W, Zhang H, Lyu W ( 2023 ) . Ultrasonication-Assisted Fabrication of High-Performance Carbon Nanotube Composites . ICCM International Conferences on Composite Materials .

Kernin A, Ventura L, Soul A, Chen K, Wan K, Lu W, Steiner P, Kocabas C et al. ( 2022 ) . Kirigami inspired shape programmable and reconfigurable multifunctional nanocomposites for 3D structures . Materials & Design vol. 224 ,

Klayya S, Tawichai N, Intatha U, Zhang H, Bilotti E, Soykeabkaew N ( 2022 ) . Sustainable nanocomposite coating for moulded pulp with enhanced barrier properties for food packaging applications . Polymer International vol. 72 , ( 3 ) 323 - 332 .

Yu X, Bhatti MR, Ren X, Steiner P, Di Sacco F, Dong M, Zhang H, Papageorgiou D et al. ( 2022 ) . Dielectric polymer composites with ultra-high thermal conductivity and low dielectric loss . Composites Science and Technology vol. 229 ,

Bhatti MRA, Kernin A, Tausif M, Zhang H, Papageorgiou D, Bilotti E, Peijs T, Bastiaansen CWM ( 2022 ) . Light-Driven Actuation in Synthetic Polymers: A Review from Fundamental Concepts to Applications . Advanced Optical Materials vol. 10 , ( 10 )

Thorn TDS, Liu Y, Bilotti E, Peijs T, Zhang H ( 2022 ) . EASY-REPAIRING OF HIGH PERFORMANCE FIBRE REINFORCED COMPOSITES WITH MULTIPLE HEALING CYCLES AND INTEGRATED DAMAGE SENSING . ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability . vol. 1 , 306 - 313 .

Wang Y, Yao X, Liu Y, Bilotti E, Zhang H ( 2022 ) . ENERGY EFFICIENT OUT-OF-OVEN MANUFACTURING FOR NATURAL FIBRE COMPOSITES WITH INTEGRATED DEFORMATION SENSING . ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability . vol. 1 , 547 - 554 .

Liu Y, Bilotti E, Peijs T, Zhang H ( 2022 ) . SUSTAINABLE MULTIFUNCTIONAL COMPOSITES: FROM ENERGY EFFICIENT MANUFACTURING TO INTEGRATED SENSING AND DE-ICING CAPABILITIES . ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability . vol. 1 , 344 - 347 .

Yao X, Wang Y, Liu Y, Bilotti E, Zhang H ( 2022 ) . TAILORED OUT-OF-OVEN CURING OF HIGH PERFORMANCE FRPS UTILISING A DOUBLE POSITIVE TEMPERATURE COEFFICIENT EFFECT . ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability . vol. 1 , 330 - 336 .

Liu Y, Zhang H, Peijs T, Bilotti E ( 2022 ) . THE EFFECT OF CONDUCTIVE NETWORK ON POSITIVE TEMPERATURE COEFFICIENT BEHAVIOUR FOR MULTIFUNCTIONAL COMPOSITES: FROM FLEXIBLE SENSING TO SUSTAINABLE MANUFACTURING . ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability . vol. 1 , 909 - 916 .

Tomes O, Zhang H, Bilotti E, Papageorgiou DG ( 2022 ) . ULTRASOFT AND HYPERELASTIC ELECTRICALLY CONDUCTIVE NANOCOMPOSITES FOR STRAIN SENSING APPLICATIONS . ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability . vol. 1 , 1369 - 1376 .

Ren X, Meng N, Ventura L, Goutianos S, Barbieri E, Zhang H, Yan H, Reece MJ et al. ( 2022 ) . Ultra-high energy density integrated polymer dielectric capacitors . Journal of Materials Chemistry A vol. 10 , ( 18 ) 10171 - 10180 .

Wan K, Liu Z, Schroeder BC, Chen G, Santagiuliana G, Papageorgiou DG, Zhang H, Bilotti E ( 2021 ) . Highly stretchable and sensitive self-powered sensors based on the N-Type thermoelectric effect of polyurethane/Nax(Ni-ett)n/graphene oxide composites . Composites Communications vol. 28 ,

Carrola M, Asadi A, Zhang H, Papageorgiou DG, Bilotti E, Koerner H ( 2021 ) . Best of Both Worlds: Synergistically Derived Material Properties via Additive Manufacturing of Nanocomposites (Adv. Funct. Mater. 46/2021) . Advanced Functional Materials vol. 31 , ( 46 ) 2170343 - 2170343 .

Dong M, Zhang H, Tzounis L, Santagiuliana G, Bilotti E, Papageorgiou DG ( 2021 ) . Multifunctional epoxy nanocomposites reinforced by two-dimensional materials: A review . Carbon vol. 185 , 57 - 81 .

Zhang X, Jiang X, Qu S, Zhang H, Yang W, Lu W ( 2021 ) . Effects of ultrasonication on the microstructures and mechanical properties of carbon nanotube films and their based composites . Composites Science and Technology vol. 221 , Article 109136 , 109136 - 109136 .

Le B, Kernin A, Khaliq J, Fu G, Huo D, Bilotti E, Zhang H, Shyha I ( 2021 ) . Micro-end-milling of carbon nanotube reinforced epoxy nanocomposites manufactured using three roll mill technique . Journal of Manufacturing Processes vol. 70 , 307 - 320 .

Tao Y, Ren M, Zhang H, Peijs T ( 2021 ) . Recent progress in acoustic materials and noise control strategies – A review . Applied Materials Today vol. 24 ,

Fan X, Wang F, Gao Q, Zhang Y, Huang F, Xiao R, Qin J, Zhang H et al. ( 2021 ) . Nature inspired hierarchical structures in nano-cellular epoxy/graphene-Fe3O4 nanocomposites with ultra-efficient EMI and robust mechanical strength . Journal of Materials Science and Technology

Fan X, Gao Q, Gao Y, Zhang G, Huang F, Xiao R, Liu W, Wang F et al. ( 2021 ) . Microcellular epoxy/graphene nanocomposites with outstanding electromagnetic interference shielding and mechanical performance by overcoming nanofiller loading/dispersion dichotomy . Composites Science and Technology109000 - 109000 .

Carrola M, Asadi A, Zhang H, Papageorgiou DG, Bilotti E, Koerner H ( 2021 ) . Best of Both Worlds: Synergistically Derived Material Properties via Additive Manufacturing of Nanocomposites . Advanced Functional Materials vol. 31 , ( 46 )

Klayya S, Tawichai N, Intatha U, Zhang H, Bilotti E, Soykeabkaew N ( 2021 ) . Tailoring nanofibrillated cellulose through sonication and its potential use in molded pulp packaging . Nanocomposites vol. 7 , ( 1 ) 109 - 122 .

Wan K, Liu Y, Santagiuliana G, Barandun G, Taroni Junior P, Güder F, Bastiaansen CWM, Baxendale M et al. ( 2021 ) . Self-powered ultrasensitive and highly stretchable temperature–strain sensing composite yarns . Materials Horizons

Cheng K, Xiong W, Li Y, Tang D, Geng H, Sun M, Hao L, Wang HS et al. ( 2021 ) . In-situ deposition of diamond on functionally graded copper scaffold for improved thermal conductivity and mechanical properties . Materials Letters vol. 299 , Article 130050 ,

Liu Y, Zhang H, Bilotti E ( 2021 ) . Polymer Nanocomposites for Temperature Sensing and Self‐regulating Heating Devices . Polymer Nanocomposite Materials , Wiley

He Q, Li X, Zhang J, Zhang H, Briscoe J ( 2021 ) . P–N junction-based ZnO wearable textile nanogenerator for biomechanical energy harvesting . Nano Energy vol. 85 ,

Yin X, Li Q, Wang H, Yang W, Zhou X, Zhang H, Lyu W ( 2021 ) . Enhancing the reinforcing efficiency in CNT nanocomposites via the development of pyrene-based active dispersants . RSC Advances vol. 11 , ( 39 ) 23892 - 23900 .

Meng N, Ren X, Zhu X, Wu J, Yang B, Gao F, Zhang H, Liao Y et al. ( 2020 ) . Multiscale understanding of electric polarization in poly(vinylidene fluoride)-based ferroelectric polymers . Journal of Materials Chemistry C

Sun Z, Wang L, Zhou J, Fan X, Xie H, Zhang H, Zhang G, Shi X ( 2020 ) . Influence of polylactide (PLA) stereocomplexation on the microstructure of pla/pbs blends and the cell morphology of their microcellular foams . Polymers vol. 12 , ( 10 ) 1 - 15 .

Liu Y, Asare E, Porwal H, Barbieri E, Goutianos S, Evans J, Newton M, Busfield JJC et al. ( 2020 ) . The effect of conductive network on positive temperature coefficient behaviour in conductive polymer composites . Composites Part A: Applied Science and Manufacturing vol. 139 ,

Bhatti MRA, Bilotti E, Zhang H, Bastiaansen CWM, Peijs T ( 2020 ) . Photo-thermal actuation of ultra-drawn high-density polyethylene . Polymer vol. 207 ,

Bellot CM, de Leo G, Zhang H, Kernin A, Scarponi C, Sangermano M, Olivero M, Bilotti E et al. ( 2020 ) . Dual In-Situ Water Diffusion Monitoring of GFRPs based on Optical Fibres and CNTs . Journal of Composites Science vol. 4 , ( 3 )

Bhatti MRA, Bilotti E, Zhang H, Varghese S, Verpaalen RCP, Schenning APHJ, Bastiaansen CWM, Peijs T ( 2020 ) . Ultra-High Actuation Stress Polymer Actuators as Light-Driven Artificial Muscles . ACS applied materials &amp; interfaces vol. 12 , ( 29 ) 33210 - 33218 .

Lin Y, Cao J, Zhu M, Bilotti E, Zhang H, Bastiaansen CWM, Peijs T ( 2020 ) . High-Performance Transparent Laminates Based on Highly Oriented Polyethylene Films . ACS Applied Polymer Materials vol. 2 , ( 6 ) 2458 - 2468 .

Li Y, Feng Z, Hao L, Huang L, Xin C, Wang Y, Bilotti E, Essa K et al. ( 2020 ) . A Review on Functionally Graded Materials and Structures via Additive Manufacturing: From Multi‐Scale Design to Versatile Functional Properties . Advanced Materials Technologies vol. 5 , ( 6 )

Ren X, Meng N, Zhang H, Wu J, Abrahams I, Yan H, Bilotti E, Reece MJ ( 2020 ) . Giant energy storage density in PVDF with internal stress engineered polar nanostructures . Nano Energy vol. 72 ,

Liu Y, van Vliet T, Tao Y, Busfield JJC, Peijs T, Bilotti E, Zhang H ( 2020 ) . Sustainable and self-regulating out-of-oven manufacturing of FRPs with integrated multifunctional capabilities . Composites Science and Technology vol. 190 ,

Zhang H, Peijs T ( 2020 ) . Chapter 9 Multifunctional composites based on hierarchical micro–nanostructures: design, manufacturing, properties, and applications . Fiber-Reinforced Nanocomposites: Fundamentals and Applications , Elsevier

Zhang H, Liu Y, Kernin A, Wan K, Bilotti E, Peijs T ( 2020 ) . Nano-engineered hierarchical composites with multifunctionalities: From nanofiller network formation to self-sensing and de-icing . ECCM 2018 - 18th European Conference on Composite Materials .

Rogalski JJ, Zhang H, Yao J, Bastiaansen CWM, Peijs T ( 2019 ) . High-modulus rotary jet spun co-polyimide nanofibers and their composites . Nanocomposites vol. 6 , ( 1 ) 1 - 11 .

Meng N, Ren X, Santagiuliana G, Ventura L, Zhang H, Wu J, Yan H, Reece MJ et al. ( 2019 ) . Ultrahigh β-phase content poly(vinylidene fluoride) with relaxor-like ferroelectricity for high energy density capacitors . Nature Communications vol. 10 , ( 1 )

Wan K, Taroni PJ, Liu Z, Liu Y, Tu Y, Santagiuliana G, Hsia I, Zhang H et al. ( 2019 ) . Flexible and Stretchable Self‐Powered Multi‐Sensors Based on the N‐Type Thermoelectric Response of Polyurethane/Na x (Ni‐ett) n Composites . Advanced Electronic Materials1900582 - 1900582 .

Li Y, Feng Z, Huang L, Essa K, Bilotti E, Zhang H, Peijs T, Hao L ( 2019 ) . Additive manufacturing high performance graphene-based composites: A review . Composites Part A Applied Science and Manufacturing vol. 124 ,

Lin Y, Tu W, Verpaalen RCP, Zhang H, Bastiaansen CWM, Peijs T ( 2019 ) . Transparent, Lightweight, and High Strength Polyethylene Films by a Scalable Continuous Extrusion and Solid-State Drawing Process . Macromolecular Materials and Engineering

Feng Z, Li Y, Xin C, Tang D, Xiong W, Zhang H ( 2019 ) . Fabrication of Graphene-Reinforced Nanocomposites with Improved Fracture Toughness in Net Shape for Complex 3D Structures via Digital Light Processing . C – Journal of Carbon Research vol. 5 , ( 2 )

LIN Y, Patel R, CAO J, TU W, ZHANG H, BILOTTI E, BASTIAANSEN C, PEIJS AA ( 2019 ) . Glass-like transparent high strength polyethylene films by tuning drawing temperature . Polymer vol. 171 , 180 - 191 .

Kang Y, Chaoli W, Youbei Q, Junwei G, ZHANG H, Ton P, Jie K, Guangchang Z et al. ( 2019 ) . Tissue-Engineered Trachea Consisting of Electrospun Patterned sc-PLA/GO-g-IL Fibrous Membranes with Antibacterial Property and 3D-Printed Skeletons with Elasticity . Biomacromolecules

Liu Y, Vliet T, Govaert L, Bilotti E, Peijs T, Zhang H ( 2019 ) . Multifunctional fibre reinforced composites: From smart out-of-oven manufacturing to integrated sensing and de-icing capabilities . ICCM International Conferences on Composite Materials . vol. 2019-August ,

KERNIN A, WAN K, LIU Y, kong J, shi X, BILOTTI E, Peijs T, ZHANG H ( 2018 ) . The effect of graphene network formation on the electrical, mechanical, and multifunctional properties of graphene/epoxy nanocomposites . Composites Science and Technology vol. 169 , 224 - 231 .

BILOTTI E, LIU Y, ZHANG H, PORWAL H, BUSFIELD J, PEIJS AA ( 2018 ) . Pyroresistivity in Conductive Polymer Composites: A Perspective on Recent Advances and New Applications . Polymer International

Santagiuliana G, Picot OT, Crespo M, Porwal H, Zhang H, Li Y, Rubini L, Colonna S et al. ( 2018 ) . Breaking the Nanoparticle Loading-Dispersion Dichotomy in Polymer Nanocomposites with the Art of Croissant-Making . ACS Nano

Tao Y, Liu Y, Zhang H, Stevens CA, Bilotti E, Peijs T, Busfield JJC ( 2018 ) . Smart cord-rubber composites with integrated sensing capabilities by localised carbon nanotubes using a simple swelling and infusion method . Composites Science and Technology vol. 167 , 24 - 31 .

Liu F, Kong J, Luo C, Ye F, Luan X, Tian N, Liu Y, Zhang H et al. ( 2018 ) . High temperature self-healing SiBCN ceramics derived from hyperbranched polyborosilazanes . Advanced Composites and Hybrid Materials

Liu Y, Zhang H, Porwal H, Tu W, Wan K, Evans J, Newton M, Busfield JJC et al. ( 2018 ) . Tailored pyroresistive performance and flexibility by introducing a secondary thermoplastic elastomeric phase into graphene nanoplatelet (GNP) filled polymer composites for self-regulating heating devices . Journal of Materials Chemistry C vol. 6 , ( 11 ) 2760 - 2768 .

Li Y, Zhang H, Liu Y, WANG HS, Huang Z, Peijs T, Bilotti E ( 2018 ) . Synergistic Effects of Spray-Coated Hybrid Carbon Nanoparticles for Enhanced Electrical and Thermal Surface Conductivity of CFRP Laminates . Composites Part A: Applied Science and Manufacturing

Taroni PJ, SANTAGIULIANA G, WAN K, Calado P, QIU M, ZHANG H, PUGNO N, PALMA M et al. ( 2017 ) . Toward Stretchable Self-Powered Sensors Based on the Thermoelectric Response of PEDOT:PSS/Polyurethane Blends . Advanced Functional Materials

LIU Y, ZHANG H, PORWAL H, TU W, Evans J, NEWTON M, BUSFIELD JJC, Peijs et al. ( 2017 ) . Universal Control on Pyro-resistive Behaviour of Flexible Self-regulating Heating Devices . Advanced Functional Materials

Gao Y, Picot OT, Zhang H, Bilotti E, Peijs T ( 2017 ) . Synergistic effects of filler size on thermal annealing-induced percolation in polylactic acid (PLA)/graphite nanoplatelet (GNP) nanocomposites . Nanocomposites vol. 3 , ( 2 ) 67 - 75 .

Wong D, ZHANG H, BILOTTI E, PEIJS T ( 2017 ) . Interlaminar toughening of woven fabric carbon/epoxy composite laminates using hybrid aramid/phenoxy interleaves . Composites Part A: Applied Science and Manufacturing vol. 101 , 151 - 159 .

Li Y, Zhang H, Huang Z, Bilotti E, Peijs T ( 2017 ) . Graphite Nanoplatelet Modified Epoxy Resin for Carbon Fibre Reinforced Plastics with Enhanced Properties . Journal of Nanomaterials vol. 2017 ,

Zhang H, Liu Y, Huo S, Briscoe J, Tu W, Picot OT, Rezai A, Bilotti E et al. ( 2017 ) . Filtration effects of graphene nanoplatelets in resin infusion processes: Problems and possible solutions . Composites Science and Technology vol. 139 , 138 - 145 .

ZHANG H, Li Y, porwal H, Huang Z, Bilotti E, Peijs T ( 2017 ) . Mechanical, Electrical and Thermal Properties of In-situ Exfoliated Graphene/Epoxy Nanocomposites . Composites Part A: Applied Science and Manufacturing

Zhang H, Liu Y, Kernin A, Bilotti E, Peijs T ( 2017 ) . Filtration effects of graphene nanoplatelets in liquid moulding of composites: Problems and possible solutions . ICCM International Conferences on Composite Materials . vol. 2017-August ,

Porwal H, Asare E, Liu Y, Zhang H, Evans J, Newton M, Bilotti E ( 2017 ) . Understanding the mechanism of positive thermal coefficient in conductive polymer composites . ICCM International Conferences on Composite Materials . vol. 2017-August ,

Zhang H, Liu Y, Huang M, Bilotti E, Peijs T ( 2016 ) . Dissolvable thermoplastic interleaves for carbon nanotube localization in carbon/epoxy laminates with integrated damage sensing capabilities . Structural Health Monitoring vol. 17 , ( 1 ) 59 - 66 .

Zhang H, Bilotti E, Peijs T ( 2016 ) . Nano-Engineered Hierarchical Carbon Fibres and Their Composites: Preparation, Properties and Multifunctionalities . The Structural Integrity of Carbon Fiber Composites , Springer Nature

Li Y, Porwal H, Huang Z, Zhang H, Bilotti E, Peijs T ( 2016 ) . Enhanced Thermal and Electrical Properties of Polystyrene‐Graphene Nanofibers via Electrospinning . Journal of Nanomaterials vol. 2016 , ( 1 ) 1 - 8 .

Li Y, Zhang H, Crespo M, Porwal H, Picot O, Santagiuliana G, Huang Z, Barbieri E et al. ( 2016 ) . In Situ Exfoliation of Graphene in Epoxy Resins: A Facile Strategy to Efficient and Large Scale Graphene Nanocomposites . ACS Appl Mater Interfaces vol. 8 , ( 36 ) 24112 - 24122 .

Asare E, Basir A, Tu W, Porwal H, Zhang H, Liu Y, Evans J, Newton M et al. ( 2016 ) . Effect of mixed fillers on positive temperature coefficient of conductive polymer composites . Nanocomposites vol. 2 , ( 2 ) 58 - 64 .

Li Y, Zhang H, Bilotti E, Peijs T ( 2016 ) . Optimization of Three-Roll Mill Parameters for In-Situ Exfoliation of Graphene . MRS Advances vol. 1 , ( 19 ) 1389 - 1394 .

Zhang H, Bilotti E, Peijs T ( 2016 ) . The use of carbon nanotubes for damage sensing and structural health monitoring in laminated composites: a review . Nanocomposites vol. 1 , ( 4 ) 167 - 184 .

Li Y, Zhang H, Peijs T, Bilotti E ( 2016 ) . Graphene Delivery Systems for Hierarchical Fiber Reinforced Composites . MRS Advances vol. 1 , ( 19 ) 1339 - 1344 .

Zhang H, Bharti A, Li Z, Du S, Bilotti E, Peijs T ( 2015 ) . Localized toughening of carbon/epoxy laminates using dissolvable thermoplastic interleaves and electrospun fibres . Composites Part A Applied Science and Manufacturing vol. 79 , 116 - 126 .

Zhang H, Liu Y, Bilotti E, Peijs T ( 2015 ) . In-Situ Monitoring of Interlaminar Shear Damage in Carbon Fibre Composites . Advanced Composites Letters vol. 24 , ( 4 )

Zhang H, Liu Y, Bilotti E, Peijs T ( 2015 ) . In-situ monitoring of interlaminar shear damage in carbon fibre composites . Advanced Composites Letters vol. 24 , ( 4 ) 92 - 97 .

Zhang H, Bilotti E, Tu W, Lew CY, Peijs T ( 2015 ) . Static and dynamic percolation of phenoxy/carbon nanotube nanocomposites . European Polymer Journal vol. 68 , 128 - 138 .

Zhang H, Kuwata M, Bilotti E, Peijs T ( 2015 ) . Integrated Damage Sensing in Fibre‐Reinforced Composites with Extremely Low Carbon Nanotube Loadings . Journal of Nanomaterials vol. 2015 , ( 1 )

Zhang H, Liu Y, Kuwata M, Bilotti E, Peijs T ( 2015 ) . Improved fracture toughness and integrated damage sensing capability by spray coated CNTs on carbon fibre prepreg . Composites Part A Applied Science and Manufacturing vol. 70 , 102 - 110 .

Zhang H, Liu Y, Kuwata M, Bilotti E, Peijs T ( 2015 ) . Improved fracture toughness and integrated damage sensing capability by spray coated CNTs on carbon fibre prepreg . Composites Part A: Applied Science and Manufacturing vol. 70 , 102 - 110 .

Bilotti E, Zhang H, Deng H, Zhang R, Fu Q, Peijs T ( 2013 ) . Controlling the dynamic percolation of carbon nanotube based conductive polymer composites by addition of secondary nanofillers: The effect on electrical conductivity and tuneable sensing behaviour . Composites Science and Technology vol. 74 , 85 - 90 .

Zhang H, Kuwata M, Bilotti E, Peijs T ( 2013 ) . Damage sensing in fibre-reinforced composites using carbon nanotube networks by spray coating . ICCM International Conferences on Composite Materials . vol. 2013-July , 2856 - 2864 .

Zhang H, Kuwata M, Bilotti E, Peijs T ( 2012 ) . Damage sensing in fibre-reinforced composites using carbon nanotube networks by spray coating . ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials .

Kuwata M, Zhang H, Bilotti E, Peijs T ( 2012 ) . Interlaminar toughness improvement of carbon fibre/epoxy composite laminates by electrospun nanofibre interleaves . ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials .

Bilotti E, Deng H, Zhang R, Zhang H, Fu Q, Peijs T ( 2012 ) . Synergistic effects in ternary polymer nanocomposites . ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials .