Publications: Dr Yong Pang
Liu W, Li X, Liu M, Cui H, Huang J, Pang Y, Ma J
(
2024
)
.
Virtual laboratory enabled constitutive modelling of dual phase steels
.
International Journal of Plasticity
Lyu Y, Pang Y, Liu T, Sun W
(
2024
)
.
Determining hyperelastic properties of the constituents of the mussel byssus system
.
Soft Matter
Bhuwal AS, Pang Y, Maskery I, Ashcroft I, Sun W, Liu T
(
2023
)
.
Creep characterisation of Inconel 718 lattice metamaterials manufactured by laser powder bed fusion
.
Advanced Engineering Materials
Ragab R, Pang Y, Liu T, Neate N, Li M, Sun W
(
2023
)
.
Unravelling the effects of ratcheting and constraint on the cyclic behaviour of a martensitic steel under elevated temperature
.
Mechanics of Materials104708
-
104708
.
Liu W, Huang J, Pang Y, Zhu K, Li S, Ma J
(
2023
)
.
Multi-scale modelling of evolving plastic anisotropy during Al-alloy sheet forming
.
International Journal of Mechanical Sciences
vol.
247
,
Bhuwal AS, Pang Y, Ashcroft I, Sun W, Liu T
(
2023
)
.
Discovery of quasi-disordered truss metamaterials inspired by natural cellular materials
.
Journal of the Mechanics and Physics of Solids105294
-
105294
.
Pang Y, Grilli N, Su H, Liu W, Ma J, Yu SF
(
2022
)
.
Experimental investigation on microstructures and mechanical properties of PG4 flash-butt rail welds
.
Engineering Failure Analysis
vol.
141
,
Bhuwal AS, Pang Y, Liu T, Ashcroft I, Sun W
(
2022
)
.
Data-driven design of high ductile metamaterials under uniaxial tension
.
Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems
,
Taylor & Francis
Liu W, Pang Y
(
2021
)
.
A multi-scale modelling framework for anisotropy prediction in aluminium alloy sheet and its application in the optimisation of the deep-drawing process
.
International Journal of Advanced Manufacturing Technology
vol.
114
,
(
11-12
)
3401
-
3417
.
Micheletto A, Cookson J, Pang Y, Chen B, Mutton P
(
2020
)
.
The structural integrity of flash-butt welded premium rail steel – Evaluation of strength, microstructure and defects
.
Proceedings of the Institution of Mechanical Engineers Part F Journal of Rail and Rapid Transit
vol.
235
,
(
8
)
1006
-
1012
.
Liu W, Chen BK, Pang Y, Najafzadeh A
(
2020
)
.
A 3D phenomenological yield function with both in and out-of-plane mechanical anisotropy using full-field crystal plasticity spectral method for modelling sheet metal forming of strong textured aluminum alloy
.
International Journal of Solids and Structures
vol.
193
,
117
-
133
.
Pang Y, Chen BK, Yu SF, Lingamanaik SN
(
2020
)
.
Enhanced laser speckle optical sensor for in situ strain sensing and structural health monitoring
.
Optics Letters
vol.
45
,
(
8
)
2331
-
2334
.
Pang Y, Chen BK, Liu W, Yu SF, Lingamanaik SN
(
2020
)
.
Development of a non-contact and non-destructive laser speckle imaging system for remote sensing of anisotropic deformation around fastener holes
.
NDT & E International
vol.
111
,
Pang Y, Lingamanaik SN, Chen BK, Yu SF
(
2020
)
.
Measurement of deformation of the concrete sleepers under different support conditions using non-contact laser speckle imaging sensor
.
Engineering Structures
vol.
205
,
Liu W, Chen BK, Pang Y
(
2019
)
.
Numerical investigation of evolution of earing, anisotropic yield and plastic potentials in cold rolled FCC aluminium alloy based on the crystallographic texture measurements
.
European Journal of Mechanics - A/Solids
vol.
75
,
41
-
55
.
Pang Y, Chen BK, Liu W
(
2019
)
.
An investigation of plastic behaviour in cold-rolled aluminium alloy AA2024-T3 using laser speckle imaging sensor
.
The International Journal of Advanced Manufacturing Technology
vol.
103
,
(
5-8
)
2707
-
2724
.
Liu W, Chen BK, Pang Y
(
2018
)
.
A new temperature-dependent anisotropic constitutive model for predicting deformation and spring-back in warm deep drawing of automotive AA5086-H111 aluminium alloy sheet
.
The International Journal of Advanced Manufacturing Technology
vol.
97
,
(
9-12
)
3407
-
3421
.