Skip to main content
Research
  1. Queen Mary University of London
  2. Research
  3. Publications

Publications: Dr Haibao Liu

Back to Search
Tüfekci M, Sun Y, Yuan J, Maharaj C, Liu H, Dear JP, Salles L ( 2024 ) . Analytical vibration modelling and solution of bars with frictional clamps . Journal of Sound and Vibration vol. 577 ,
Mou H, Chen Y, Feng Z, Liu H ( 2024 ) . Damage and energy absorption behavior of CFRP/aluminum hybrid open-section thin-walled columns subjected to quasi-static loading . Thin-Walled Structures vol. 197 ,
Wang H, Ding Z, Chen X, Liu H, Li N ( 2024 ) . Experimental characterisation and constitutive modelling of the intra-ply tensile and shear properties of unidirectional fibre reinforced thermoplastics (UD FRTPs) under solid-state stamp forming conditions . Composites Part A Applied Science and Manufacturing vol. 179 ,
Zhang D, Zhang C, Qi J, Zhou J, Zheng X, Liu H ( 2024 ) . Experimental and numerical studies on filled-hole compression of FRP laminates considering different countersunk hole configurations . Construction and Building Materials vol. 417 ,
Tüfekci M, Baytak T, Bulut O, Pir İ, Arat SA, Özkal B, Liu H, Dear JP et al. ( 2024 ) . Nonlinear behaviour of epoxy and epoxy-based nanocomposites: an integrated experimental and computational analysis . Mechanics Based Design of Structures and Machines vol. ahead-of-print , ( ahead-of-print ) 1 - 31 .
Zhang D, Zhang W, Zhou J, Zheng X, Wang J, Liu H ( 2023 ) . Numerical investigation of the low-velocity impact damage resistance and tolerance of composite laminates with preloads . Aerospace Science and Technology vol. 142 ,
Ding Y, Liu J, Hall ZEC, Brooks RA, Liu H, Kinloch AJ, Dear JP ( 2023 ) . Damage and energy absorption behaviour of composite laminates under impact loading using different impactor geometries . Composite Structures vol. 321 ,
Zhang W, Zhang D, Zhou J, Qi J, Zhao W, Yang S, Dear JP, Liu H ( 2023 ) . Damage mechanisms of composite laminates under impact loading including the effect of pre-load . Thin-Walled Structures vol. 191 ,
Kong X, Zhou H, Zheng C, Zhu Z, Wu W, Guan Z, Dear JP, Liu H ( 2023 ) . Dynamic response and failure behaviour of thermoplastic fibre–metal​ laminates subjected to confined blast load . Thin-Walled Structures vol. 187 , 110760 - 110760 .
Hall ZEC, Liu J, Brooks RA, Liu H, Dear JP ( 2023 ) . Impact Testing on the Pristine and Repaired Composite Materials for Aerostructures . Applied Mechanics vol. 4 , ( 2 ) 421 - 444 .
Zhou J, Liu H, Dear JP, Falzon BG, Kazancı Z ( 2023 ) . Comparison of different quasi-static loading conditions of additively manufactured composite hexagonal and auxetic cellular structures . International Journal of Mechanical Sciences vol. 244 ,
Tüfekci M, Özkal B, Maharaj C, Liu H, Dear JP, Salles L ( 2023 ) . Strain-rate-dependent mechanics and impact performance of epoxy-based nanocomposites . Composites Science and Technology vol. 233 ,
Liu H, Liu J, Hall ZEC, Brooks RA, Crocker JWM, Joesbury AM, Harper LT, Blackman BRK et al. ( 2023 ) . Modelling the effects of patch-plug configuration on the impact performance of patch-repaired composite laminates . Composites Science and Technology vol. 233 , 109917 - 109917 .
Liu H, Zhou J, Zhang D, Li S, Giannopoulos I ( 2022 ) . Effects of contact friction and ply blocking on the crush behaviour of thin-walled composite structures: A numerical study . Thin-Walled Structures vol. 182 , 110214 - 110214 .
Liu H, Brooks RA, Hall ZEC, Liu J, Crocker JWM, Joesbury AM, Harper LT, Blackman BRK et al. ( 2022 ) . Experimental and numerical investigations on the impact behaviour of pristine and patch-repaired composite laminates . Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences vol. 380 , ( 2232 ) 20210340 - 20210340 .
Weizhou WU, Shipeng LI, Xuda QIN, Wentao LIU, Xin CUI, Hao LI, Mengrui SHI, Haibao LIU ( 2022 ) . Effects of fiber orientation on tool wear evolution and wear mechanism when cutting carbon fiber reinforced plastics . Chinese Journal of Aeronautics vol. 36 , ( 5 ) 549 - 565 .
Liu H, Zhou J, Kong X, Li S ( 2022 ) . Fracture behaviour of fibre-reinforced composite materials subjected to shear loading: An experimental and numerical study . International Journal of Lightweight Materials and Manufacture vol. 6 , ( 1 ) 108 - 116 .
Hall ZEC, Liu J, Brooks RA, Liu H, Crocker JWM, Joesbury AM, Harper LT, Blackman BRK et al. ( 2022 ) . The effectiveness of patch repairs to restore the impact properties of carbon-fibre reinforced-plastic composites . Engineering Fracture Mechanics vol. 270 , 108570 - 108570 .
Liu J, Tang X, Li S, Qin X, Li H, Wu W, Srijana Y, Liu W et al. ( 2022 ) . Optimization of multi-tooth milling tool for interlaminar damage suppression in the milling of carbon fiber–reinforced polymers . International Journal of Advanced Manufacturing Technology vol. 121 , ( 1-2 ) 1235 - 1251 .
Brooks RA, Wang H, Ding Z, Xu J, Song Q, Liu H, Dear JP, Li N ( 2022 ) . A review on stamp forming of continuous fibre-reinforced thermoplastics . International Journal of Lightweight Materials and Manufacture vol. 5 , ( 3 ) 411 - 430 .
Zhang D, Zheng X, Zhou J, Song X, Jia P, Liu H, Liu X ( 2022 ) . Effect of Braiding Architectures on the Mechanical and Failure Behavior of 3D Braided Composites: Experimental Investigation . Polymers vol. 14 , ( 9 )
Li Y, Chen X, Zhou J, Liu X, Zhang D, Du F, He W, Jia P et al. ( 2022 ) . A review of high‐velocity impact on fiber‐reinforced textile composites: Potential for aero engine applications . International Journal of Mechanical System Dynamics vol. 2 , ( 1 ) 50 - 64 .
Zheng J, Maharaj C, Liu J, Chai H, Liu H, Dear JP ( 2022 ) . A Comparative Study on the Failure Criteria for Predicting the Damage Initiation in Fiber-Reinforced Composites . Mechanics of Composite Materials vol. 58 , ( 1 ) 125 - 140 .
Liu H, Liu J, Kaboglu C, Zhou J, Kong X, Li S, Blackman BRK, Kinloch AJ et al. ( 2021 ) . Modelling the quasi-static flexural behaviour of composite sandwich structures with uniform- and graded-density foam cores . Engineering Fracture Mechanics vol. 259 , 108121 - 108121 .
Wang H, Liu H, Ding Z, Li N ( 2021 ) . Experimental and constitutive modelling studies of semicrystalline thermoplastics under solid-state stamp forming conditions . Polymer vol. 228 , 123939 - 123939 .
Hu P, Yang S, Zheng F, Yuan Y, Wang T, Li S, Liu H, Dear JP ( 2021 ) . Accurate and dynamic 3D shape measurement with digital image correlation-assisted phase shifting . Measurement Science and Technology vol. 32 , ( 7 )
Kaboglu C, Liu J, Liu H, Russo P, Simeoli G, Lopresto V, Dear JP, Maharaj C ( 2021 ) . The Effect of a Coupling Agent on the Impact Behavior of Flax Fiber Composites . Journal of Engineering Materials and Technology vol. 143 , ( 3 )
Zhang P, Kong X, Wang Z, Zheng C, Liu H, Shi G, Dear JP, Wu W ( 2021 ) . High velocity projectile impact of a composite rubber/aluminium fluid-filled container . International Journal of Lightweight Materials and Manufacture vol. 4 , ( 1 ) 1 - 8 .
Zheng C, Wang Y, Kong X, Zhou H, Liu H, Wu W ( 2020 ) . Predicting the Deflection of Square Plates Subjected to Fully Confined Blast Loading . Journal of Marine Science and Engineering vol. 8 , ( 12 )
Liu H, Liu J, Ding Y, Zheng J, Luo L, Kong X, Zhou J, Blackman BRK et al. ( 2020 ) . Modelling the effect of projectile hardness on the impact response of a woven carbon-fibre reinforced thermoplastic-matrix composite . International Journal of Lightweight Materials and Manufacture vol. 3 , ( 4 ) 403 - 415 .
Liu H, Liu J, Ding Y, Hall ZE, Kong X, Zhou J, Blackman BRK, Kinloch AJ et al. ( 2020 ) . A three-dimensional elastic-plastic damage model for predicting the impact behaviour of fibre-reinforced polymer-matrix composites . Composites Part B Engineering vol. 201 ,
Liu H, Liu J, Ding Y, Zheng J, Kong X, Zhou J, Harper L, Blackman BRK et al. ( 2020 ) . The behaviour of thermoplastic and thermoset carbon fibre composites subjected to low-velocity and high-velocity impact . Journal of Materials Science vol. 55 , ( 33 ) 15741 - 15768 .
Liu H, Liu J, Ding Y, Zhou J, Kong X, Blackman BRK, Kinloch AJ, Falzon BG et al. ( 2020 ) . Effects of Impactor Geometry on the Low-Velocity Impact Behaviour of Fibre-Reinforced Composites: An Experimental and Theoretical Investigation . Applied Composite Materials vol. 27 , ( 5 ) 533 - 553 .
Zhang R, Han D, Yu G, Wang H, Liu H, Yu H, Li J ( 2020 ) . Bionic research on spikes based on the tractive characteristics of ostrich foot toenail . SIMULATION vol. 96 , ( 9 ) 713 - 723 .
Liu H, Liu J, Kaboglu C, Chai H, Kong X, Blackman BRK, Kinloch AJ, Dear JP ( 2020 ) . Experimental investigations on the effects of projectile hardness on the impact response of fibre-reinforced composite laminates . International Journal of Lightweight Materials and Manufacture vol. 3 , ( 2 ) 77 - 87 .
Liu Y, Li S, Li H, Qin X, Xing Y, Liu H ( 2020 ) . The design and performance evaluation of assisted chip removal system in helical milling of CFRP/Ti stacks . The International Journal of Advanced Manufacturing Technology vol. 108 , ( 5-6 ) 1297 - 1308 .
Zhang X, Liu H, Maharaj C, Zheng M, Mohagheghian I, Zhang G, Yan Y, Dear JP ( 2020 ) . Impact response of laminated glass with varying interlayer materials . International Journal of Impact Engineering vol. 139 ,
Liu H, Liu J, Kaboglu C, Zhou J, Kong X, Blackman BRK, Kinloch AJ, Dear JP ( 2020 ) . The behaviour of fibre-reinforced composites subjected to a soft impact-loading: An experimental and numerical study . Engineering Failure Analysis . vol. 111 ,
Liu H, Liu J, Ding Y, Zhou J, Kong X, Harper LT, Blackman BRK, Falzon BG et al. ( 2020 ) . Modelling damage in fibre-reinforced thermoplastic composite laminates subjected to three-point bend loading . Composite Structures vol. 236 ,
Xiang N, Zhang X, Zheng M, Ge Y, Wang T, Liu H, Maharaj C, Dear JP et al. ( 2020 ) . Microstructure and tensile properties of injection molded thermoplastic polyurethane with different melt temperatures . Journal of Applied Polymer Science vol. 137 , ( 29 )
Liu H, Falzon BG, Dear JP ( 2019 ) . An experimental and numerical study on the crush behaviour of hybrid unidirectional/woven carbon-fibre reinforced composite laminates . International Journal of Mechanical Sciences vol. 164 ,
Kong X, Zhou H, Zheng C, Liu H, Wu W, Guan Z, Dear JP ( 2019 ) . An experimental study on the mitigation effects of fine water mist on confined-blast loading and dynamic response of steel plates . International Journal of Impact Engineering vol. 134 ,
Liu J, Liu H, Kaboglu C, Kong X, Ding Y, Chai H, Blackman BRK, Kinloch AJ et al. ( 2019 ) . The Impact Performance of Woven-Fabric Thermoplastic and Thermoset Composites Subjected to High-Velocity Soft- and Hard-Impact Loading . Applied Composite Materials vol. 26 , ( 5-6 ) 1389 - 1410 .
Liu H, Falzon BG, Li S, Tan W, Liu J, Chai H, Blackman BRK, Dear JP ( 2019 ) . Compressive failure of woven fabric reinforced thermoplastic composites with an open-hole: An experimental and numerical study . Composite Structures vol. 213 , 108 - 117 .
Liu H, Liu J, Kaboglu C, Chai H, Kong X, Blackman BRK, Kinloch AJ, Dear JP ( 2019 ) . Experimental and numerical studies on the behaviour of fibre-reinforced composites subjected to soft impact loading . Procedia Structural Integrity . vol. 17 , 992 - 1001 .
Liu H, Falzon BG, Catalanotti G, Tan W ( 2018 ) . An experimental method to determine the intralaminar fracture toughness of high-strength carbon-fibre reinforced composite aerostructures . The Aeronautical Journal vol. 122 , ( 1255 ) 1352 - 1370 .
Rolfe E, Quinn R, Sancho A, Kaboglu C, Johnson A, Liu H, Hooper PA, Dear JP et al. ( 2018 ) . Blast resilience of composite sandwich panels with hybrid glass-fibre and carbon-fibre skins . Multiscale and Multidisciplinary Modeling, Experiments and Design vol. 1 , ( 3 ) 197 - 210 .
Liu H, Falzon BG, Tan W ( 2018 ) . Experimental and numerical studies on the impact response of damage-tolerant hybrid unidirectional/woven carbon-fibre reinforced composite laminates . Composites Part B Engineering vol. 136 , 101 - 118 .
Liu H, Falzon BG, Tan W ( 2018 ) . Predicting the Compression-After-Impact (CAI) strength of damage-tolerant hybrid unidirectional/woven carbon-fibre reinforced composite laminates . Composites Part A Applied Science and Manufacturing vol. 105 , 189 - 202 .
Falzon BG, Liu H, Tan W ( 2017 ) . Comment on “A tensorial based progressive damage model for fibre reinforced polymers” . Composite Structures vol. 176 , 877 - 882 .
Tan W, Falzon BG, Price M, Liu H ( 2016 ) . The role of material characterisation in the crush modelling of thermoplastic composite structures . Composite Structures vol. 153 , 914 - 927 .
Liu H, Falzon BG, Tan W ( 2016 ) . An experimental method to determine the longitudinal intralaminar fracture toughness of high tensile strength fibre-reinforced unidirectional composites . ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials .
Back to Search